MICRO TIGHT® FITTINGS AND SLEEVES For Coned ports - For Connecting Capillary Tubing / Made from PEEK™ Polymer | ||
Upchurch
Scientific® MicroTight One-Piece Fittings are designed for use with some
of our NanoPorts™ and our MicroTight Unions, Adapters and Inline
MicroFilters. Specifically made for 360µm OD tubing, 1/32" OD tubing
and our MicroTight Tubing Sleeves (discussed below), these fittings make
superior fingertight connections with capillary tubing. MicroTight
Fittings withstand temperatures up to 125°C. The MicroTight family also includes a female nut matched with one of five dedicated ferrules for connecting specific tubing ODs: F-172 70-520µm OD (with MicroTight Tubing Sleeves) F-152/F-152BLK 360µm OD F-1 12 1/32" OD F-132 1/16" OD |
The OD of each
MicroTight Tubing Sleeve is .025", with a variety of IDs available to
accommodate 70-520µm OD capillary tubing. Choose the tubing sleeve
appropriate for the outer diameter of your capillary tubing by referring
to the product listings below. Our MicroTight Connector Kit contains all
you need to make most basic capillary connections, at a substantial
savings over individually purchased components. Each 1.25" long sleeve will hold tubing to 4,000 psi (276 bar) and can be used at temperatures up to 125°C. MicroTight Fittings that do not require sleeves are rated to 5,000 psi (345 bar). Use our P-277 Extender Tool to tighten standard head 6-32 fittings in hard-toreach places. Tighten headless 6-32 fittings with our N-290 Tool. |
MICROTIGHT FITTINGS | ||||
Artikelnummer | Beschreibung | Bild | Menge | |
F-112 | MicroFerrule for 1/32" OD tubing, Natural PEEK | ea. | ||
F-124H | Headless Fittings for 360µm OD tubing, 6-32, Blue PEEK | ea. | ||
F-124S | Std. Head Fittings for 360µm OD tubing, 6-32, Blue PEEK | ea. | ||
F-125 | Std. Head Fittings for MicroTight Sleeves, 6-32, Natural PEEK | ea. | ||
F-125H | Headless Fittings for MiaoTight Sleeves, 6-32, Natural PEEK | ea. | ||
F-126H | Headless Fittings for 1/32" OD tubing, 6-32, Red PEEK | ea. Mindestabnahme 25 Stück | ||
F-126Sx | Std. Head Fittings for 1/32" OD tubing, 6-32, Red PEEK | 10-pk | ||
F-132 | MicroFerrule for 1/16" OD tubing, Natural PEEK | ea. | ||
F-152 | MicroFerrule for 360µm OD tubing, Natural PEEK | ea. | ||
F-152BLK | MicroFerrule for 360µm OD tubing, Black PEEK | ------------------- | ea. | |
F-172 | MicroFerrule for.025" OD tubing, Black PEEK | ea. | ||
N-290 | Extender Tool for Headless 6-32 Fittings | ------------------- | ea. | |
P-116 | MicroFerrule Plug, Black PEEK (1) | ea. | ||
P-277 | Extender Tool for Standard Head 6-32 Fittings | ------------------- | ea. | |
P-416 | Female Nut, 5/16-24 internal threads, Natural PEEK (2) | ea. | ||
P-416BLK | Female Nut, 5/16-24 internal threads, Black PEEK (2) | ea. | ||
P-416G | Female Nut, 5/16-24 internal threads, Green PEEK (2) | ea. | ||
P-555 | Std. Head Plug, 6-32, Natural PEEK (3) | ea. | ||
1 Can only be used with products designed to use the F-152 and F-172 Ferrule. 2 Can be used with F-112, F-132, F-152, F-1528LH, F-172 or P-116. 3 Can be used to plug any of our 6-32 threaded ports. |
MICROTIGHT PEEK TUBING SLEEVES AND KITS, .025"OD | |||||
Artikelnummer | ID | OD Size | Color | Menge | |
F-180 | 125µm (.005") | 70 - 110µm | Red | ea. | |
F-181 | 180µm (.007") | 125 - 165µm | Yellow | ea. | |
F-182 | 230µm (.009") | 175 - 215µm | Natural | ea. | |
F-183 | 280µm (.011") | 225 - 265µm | Blue | ea. | |
F-184 | 330µm (.013") | 275 - 315µm | Orange | ea. | |
F-185 | 395µm (.0155") | 340 - 380µm | Green | ea. | |
F-186 | 455µm (.018") | 400 - 440µm | Black | ea. | |
F-187 | 535µm (.021") | 480 - 520µm | Natural | ea. | |
1328 | MicroTight Tubing Sleeve Kit contains (6) each of the sleeve sizes listed above | ||||
1356 | MicroTight Connector Kit Kit contains: a 10-pack of each MicroTght Tubing Sleeve (F-180 - F-187); (2) P-770 MicroTight Adapters; and (2) MicroTight P-720 Unions |
MICROTIGHT UNIONS | |
The Conductive MicroTight Union now available from Upchurch Scientific® provides an excellent opportunity to introduce voltage into an electrospray or capillary electrophoresis system. With an extremely low internal volume of 16nL, the union can be placed inline with 360µm OD capillary tubing. Mount and apply voltage to this union using our Insulating Mounting Bracket. | Connect two pieces of capillary tubing with these Upchurch Scientific® PEEK™ MicroTight Unions. Choose from our selection of MicroTight Tubing Sleeves to use with the true zero dead volume (ZDV) P-720 Union. The P-771 True ZDV Union allows direct connection of 1/32" OD tubing without sleeves. The True ZDV Unions allow two pieces of tubing to connect directly to each other - using the included gauge plug to ensure proper alignment (also applies to MicroTight Adapters). Our P-772 Union direct connects popular 360µm OD capillary tubing without sleeves, adding only 5nL of swept volume with its .006" (150µm) thru-hole. |
Artikelnummer | Beschreibung | Threads | Thruhole | Swept Volume | Bild | |
MICROTIGHT UNIONS | ||||||
M-572 | Conductive Union, PEEK /SST | 5/16-24 to 5/16-24 | .011" (279µm) | 16 nL | ||
Includes (2) F-152, (2) P-416BLK Fittings and (1) MN-128NF Capsule Union | ||||||
P-720 | True ZDV Union, PEEK | 6-32 to 6-32 | N/A | N/A | ||
Includes (2) F-152 and (2) P-416BLK Fittings | ||||||
P-771 | True ZDV Union, PEEK | 6-32 to 6-32 | N/A | N/A | ||
Includes (2) F-126S Fittings and (1) P-553 Gauge Plug | ||||||
P-772 | Union, PEEK | 5/16-24 to 5/16-24 | .006" (150µm) | 5nL | ||
Includes (2) F-152 and (2) P-416BLK Fittings | ||||||
REPLACEMENT GAUGE PLUGS | ||||||
(To achieve true ZDV connections with our P-720 and P-771 Unions) | ||||||
P-553 | Gauge Plug, Delrin® | 6-32 | None | None | ------------------- | |
P-554 | Gauge Plug, Delrin® | 10-32 | None | None | ------------------- | |
SST = Stainless Steel |
MICROTIGHT® ADAPTERS | ||
Create a true zero dead volume (ZDV) connection between 1/16" OD tubing and capillary tubing with these Upchurch Scientific® PEEK™ MicroTight Adapters. P-770 connects 1/16" OD tubing to a variety of capillary tubing sizes using MicroTight Tubing Sleeves. Our P-881 and P-882 adapters allow connection of 1/16" OD tubing directly to 1/32" OD and 360µm tubing, respectively. !! Please note: use only the 6-32 threaded fitting supplied with each adapter they are not interchageable !! |
LUER-TO-MICROTIGHT ADAPTER | |
The new
Upchurch Scientific Luer-to-Microtight Adapter is ideal for infusing
sample into lab-on-a-chip devices. This product is made entirely of biocompatible PEEK polymer and introduces no dead volume to the flow path. Use it to directly connect a luer-tip syringe or other standard male luer to 360µm OD capillary tubing without tubing sleeves (see photo). MicroTight Fittings are included. |
Artikelnummer | Beschreibung | Threads | Thruhole | |
MICROTIGHT ADAPTERS | ||||
P-770 | True ZDV Adapter, PEEK Includes(1) F-120 Fitting, (1) F-125 Fitting and (1) P-554 Gauge Plug | 10-32 to 6-32 | N/A | |
P-881 | True ZDV Adapter, PEEK Includes (1) F-1 20R Fitting, (1) F-1 26S Fitting and (1) P-554 Gauge Plug | 10-32 to 6-32 | N/A | |
P-882 | True ZDV
Adapter, PEEK Includes (1) F-1 20B Fitting, (1) F-1 24S
Fitting and (1) P-554 Gauge Plug |
10-32 to 6-32 | N/A | |
REPLACEMENT GAUGE PLUGS | ||||
(To achieve true ZDV connections with our P-770, P-881 and P-882 Adapters) | ||||
P-553 | Gauge Plug,Delrin® | 6-32 | None | |
P-554 | Gauge Plug, Delrin® | 10-32 | None | |
LUER-TO-MICROTIGHT ADAPTER | ||||
P-662 | Luer-to-MicroTight Adapter Includes (1) F-152 Ferrule and (1) P-416 Nut | .006" (150µm) |
MICRO
TEE,
CROSS AND ELBOW
- Direct Connect 1/16", 1/32",
360µm OD Tubing, plus other Capillary Tubing / Low Swept Volume |
||
Use
Upchurch Scientific® MicroTees, MicroCrosses or MicroElbow to join
capillary tubing. All of these products are made entirely of PEEK and have
.006" (150µm) thru-holes, with resulting swept volumes ranging
from 20 to 81nL.
Several of these products are designed to connect capillary tubing of various ODs, using our MicroTigh® Tubing Sleeves. Versions for direct connecting 1/16", 1/32" and 360µm OD tubing are also available. In addition, the MicroElbow and one version of the MicroTee come with convenient predrilled .13" (3.3mm) mounting holes. |
MICROTEE, MICROCROSS AND MICROELBOW | |||
Artikelnummer | Beschreibung | Swept Volume | |
P-775 | MicroTee for
MicroTight Sleeves Includes (3) F-172 and (3) P-416 Fittings |
29nL | |
P-777 | MicroCross for
MicroTight Sleeves Includes (4) F- 172 and (4) P-416 Fittings |
38nL | |
P-874 | MicroElbow with
Mounting Hole, for MicroTight Sleeves Includes (2) F-172 and (2) P-416 Fittings |
20nL | |
P-875 | MicroTee with
Mounting Hole, for MicroTight Sleeves Includes (3) F-172 and (3) P-416 Fittings |
29nL | |
P-885 | MicroTee for
1/32" OD tubing Includes (3) F-1 12 and (3) P-416 Fittings |
29nL | |
P-887 | MicroCross for
1/32" OD tubing Includes (4) F-1 12 and (4) P-416 Fittings |
38nL | |
P-888 | MicroTee for 360µm OD tubing Includes (3) F-152 and (3) P-416BLK Fittings |
29nL | |
P-889 | MicroCross for
360µm OD tubing Includes (4) F-152 and (4) P-416BLK Fittings |
38nL | |
P-890 | MicroTeetor
1/16" OD tubing Includes (3) F-132 and (3) P-416 Fittings |
58nL | |
P-891 | MicroCross for 1/16"ODtubing Includes (4) F-132 and (4) P-416 Fittings |
81nL |
NANOPORTTM ASSEMBLIES -For Lab-on-a-Chip Applications |
|
Upchurch Scientific® NanoPort Assemblies are the first commercially available products to provide consistent fluid connections for chip-based analyses. These patent-pending products bond easily to chip surfaces with the provided Preformed Adhesive Rings or with alternative Epoxy Adhesive. Once attached, NanoPort connections withstand pressures to 1,500 psi (103 bar). NanoPorts will adhere to silicon, quartz, glass and polymers and will handle 1.5 - 6.0 in.-Ibs. (0.17 N-m to 0.68 N-m) of torque, depending on the substrate (typical fittings require only .25 - .50 in-lbs. tighten). All NanoPort components are made of inert, biocompatible PEEK™ polymer (nuts and ports) and Perlast® perfluoroelastomer (ferrules and gaskets). Their unique design also prevents adhesive contamination of the fluid path. And NanoPort connections add no additional volume to the fluid path, eliminating dead volume traditionally associated with chip-based fluid connections. | |
Choose
from several options to direct-connect 360µm, 1/32" and 1/16" OD
tubing. Or use our N-125H or N-125S with a MicroTightTM Tubing
Sleeve to connect capillary tubing with ODs of 70 - 520µm. Our NanoPort
Reservoir Assembly is designed for open well applications, such as CE.
To select the appropriate NanoPort
assembly you will need to consider:
1. Size of tubing you are connecting 2. Dimensions of the chip hole 3. Fitting style (one-piece or two-piece fittings) 4. Nut head style (standard or headless nut) Please Note: each NanoPort Assembly includes a fitting (one- or two-piece), a NanoPort, gasket, a 2-pack of preformed adhesive rings, and a clamp for holding the port in place while the adhesive cures. Custom NanoPort component configurations are available to Original Equipment Manufacturers (OEMs), including multiport manifolds, alternative thermoplastic materials, special component sizing and specific reservoir volumes. Please contact us for more information. |
Application Note | |
NanoPort reservoir Applications: -sample reservoir / Open wells for capillary alectrophoresis / Syringe injection or flushing/priming, using our P-604 Luer Adapter and luer syringe NanoPort Adhesive Cure requirements: - Preformed Adhesive Rings (included with each order) / Alternative Epoxy Adhesive (N-008): Room temperature cure for 24 hours, or cure at 120°F (49°C) for one hour / Please contact us regarding adherence to specific polymer substrates and other adhesive options | |
Cure Temperature | Cure Time |
95 Minutes | |
42 Minutes | |
20 Minutes | |
12 Minutes |
Artikelnummer | Nut | Ferrule | For Chip Hole (dia.x depth) | For Tubing OD | Bild | |
NANOPORT ASSEMBLIES | ||||||
6-32 Flat-Bottom NanoPort Assemblies (1) | ||||||
N-121H | F-123H Hdls. | N-123-04 | 1mm x 1mm | 360µm | ||
N-121S | F-123S Std. | N-123-04 | 1mm x 1mm | 360µm | ||
N-123H | F-123H Hdls. | N-123-03 | 1mm dia. or less | 360µm | ||
N-123S | F-123S Std. | N-123-03 | 1mm dia. or less | 360µm | ||
6-32 Coned NanoPort Assemblies (1) | ||||||
N-124H | F-124H Hdls. | None | Up to 1/16" | 360µm | ||
N-124S | F-124S Std. | None | Up to 1/16" | 360µm | ||
N-125H | F-125H Hdls. | None | Up to 1/16" | 70-520µm (3) | ||
N-125S | F-125 Std. | None | Up to 1/16" | 70-520µm (3) | ||
N-126H | F-126H Hdls. | None | Up to 1/16" | 1/32" | ||
N-126S | F-126S Std. | None | Up to 1/16" | 1/32" | ||
10-32 Flat-Bottom NanoPort Assemblies (1) | ||||||
N-129H | F-122H | N-123-04 | 1mm x 1mm | 360µm | ||
10-32 Coned NanoPort Assembly (1) | ||||||
N-333 | F-333N | F-142N | Up to 1/16" | 1/16" | ||
NanoPort Reservoir Assembly (2) | ||||||
N-131 | 80µL Reservoir with Insert | |||||
Abbreviation Definitons: FB = Flat-Bottom; n/a = Not Applicable dia. = Diameter; Std. = Standart; Hdls. = Headless (1) Exept as noted, each Nanoport Assembly includes (1) nut; (1) ferrule; (1) NanoPort; (1) gasket; (1) N-100-01 Preformed Adhesive Rings (2-pack); and (1) N-006 Clamp (2) Includes (1) reservoir NanoPort; (1) Insert; (1) N-123-02 Gasket; (1) N-100-01 Preformed adhesive Rings (2-pack); and 81) N-006 Clamp (3) desinged to use our microtight tubing Sleeves to connect tubing OD sizes from 70-520µm |
NANOPORT REPLACEMENT PARTS | ||||||
Artikelnummer | Product | For Port | For Chip Hole (dia. x depth) | For tubing OD | Menge | |
Fittings | ||||||
F-123H | Headless Nut | 6-32 FB | n/a | 360µm | ea. | |
F-123S | Std. Head Nuts | 6-32 FB | n/a | 360µm | ea. Mindestabnahme 25 Stück | |
F-124H | Headless Nuts | 6-32 Coned | n/a | 360µm | ea. | |
F-124S | Std. Head Nuts | 6-32 Coned | n/a | 360µm | ea. | |
F-125H | Headless Nuts | 6-32 Coned | n/a | 70-520µm (3) | ea. | |
F-125 | Std. Head Nuts | 6-32 Coned | n/a | 70-520µm (3) | ea. | |
F-126H | Headless nuts | 6-32 Coned | n/a | 1/32" | ea. Mindestabnahme 25 Stück | |
F-126Sx | Std. Head Nuts | 6-32 Coned | n/a | 1/32" | 10-pk | |
F-333Nx | Hdls. Nuts/Ferrules | 10-32 Coned | Up to 1/16" | 1/16" | 10-pk | |
F-142Nx | Ferrules | 10-32 Coned | Up to 1/16" | 1/16" | 10-pk | |
N-123-03 | Ferrules | 6-32 FB | 1mm dia. or less | 360µm | ea. | |
N-123-04x | Ferrules | 6-32, 10-32 FB | 1mm dia. x 1mm | 360µm | 10-pk | |
Gaskets | ||||||
N-123-02 | Gasket, For all assemblies except 6-32 Coned Assemblies | ea. | ||||
N-124-02 | Gasket, For 6-32 Coned Assemblies | ea. | ||||
Adhesives and Clamp | ||||||
N-006 | Clamp | ea. | ||||
N-100-01 | Preformed Adhesive Rings | 2-pk | ||||
Abbreviation Definitions: FB = Flat-Bottom; n/a = Not Applicable dia. = Diameter; Std. = Standart; Hdls. = Headless (3) desinged to use our microtight tubing Sleeves to connect tubing OD sizes from 70-520µm |
EXTENDER TOOLS | |
Upchurch
Scientific® offers Extender Tools to make it easier to tighten fittings
which would otherwise be too close for adequate finger tightening. The
special design of these tools allows tightening without damaging a nut's knurled head. Use our P-277 Extender Tool to tighten standard head 6-32 fittings. The N-290 Extender Tool is designed for tightening headless 6-32 and 6-40 fittings. Tighten headless 10-32 fittings with our P-297 Extender Tool. |
EXTENDER TOOLS | |||
Artikelnummer | Beschreibung | Menge | |
N-290 | For Headless 6-32 (and 6-40) Fittings | ea. | |
P-277 | For Standard Head 6-32 Fittings | ea. | |
P-297 | For Headless 10-32 Fittings | ea. |
MINI MICROFILTERS - Total Volume as Low as 10nL! / Conductive Version for CEC and Mass Spectrometry Applications |
|
Upchurch
Scientific® Mini MicroFilter Assemblies filter effectively with internal
volumes low enough to ensure reliable chromatographic results - even at
nanoliter flow rates! They achieve this using 1 µm and 2µm porosity
replaceable filter capsules - some versions with a thin, stainless steel
micro screen (.25mm thick x 1 mm diameter) and others with a miniscule
sintered stainless steel (SST) or titanium (Ti) frit disc (.25mm thick
x.5mm diameter). At these sizes, the filtration micro-screen and discs are
just a little bigger than the diameter of the period at the end of this
sentence. Internal volumes of these encapsulated filters are as low as
85nL with the micro-screen and 10nL to 22nL with the frit disc option! The micro-screen filter capsules have versions designed for connecting capillary tubing (70-520µm OD) in combination with our MicroTight® Tubing Sleeves, or for direct connecting 360µm and 1/32" (790µm) OD tubing. The frit-disc filter capsules (NanoFilters) are only available for versions that directly connect 360µm and 1/32" OD tubing. The fittings supplied with each MicroFilter are not interchangeable. |
|
Apply
voltage to the stainless steel filter holder body of the Conductive Mini
MicroFilter for applications such as mass spectrometry and CEC analysis.
The voltage is conducted through to the stainless steel portion of the 1
µm NanoFilter Capsule and on to the fluid stream. Try our Insulating
Mounting Bracket to apply voltage easily. Please Note: the MiniFilters that require MicroTight Tubing Sleeves to connect tubing are pressure rated to 4,000 psi (276 bar). Those designed to directconnect tubing without sleeves are pressure rated to 5,000 psi (345 bar). |
MINI MICROFILTERS COMPONENTS | |||||||
Mini MicroFilter Assembly | Filter Capsule | Porsity | Frit Material | Fittings | For use with tubing OD Size | Volume | |
M-530 | M-122 | 2µm | SST Screen | F-172, P-416 | 70-520µm | 85nL | |
M-531 | M-121 | 1µm | SST Screen | F-172, P-416 | 70-520µm | 85nL | |
M-532 | M-124 | 2µm | SST Screen | F-152, P-416BLK | 360µm | 85nL | |
M-533 | M-123 | 1µm | SST Screen | F-152, P-416BLK | 360µm | 85nL | |
M-534 | M-128 | 1µm | SST Frit | F-152, P-416BLK | 360µm | 10nL | |
M-537 | M-125 | 1µm | SSt Frit | F-152, P-416BLK | 360µm | 10nL | |
M-538 | M-126 | 1µm | Ti Frit | F-152, P-416BLK | 360µm | 10nL | |
M-542 | M-132 | 2µm | SST Screen | F-112,P-416 | 1/32" (790µm) | 97nL | |
M-543 | M-131 | 1µm | SST Screen | F-112, P-416 | 1/32" (790µm) | 97nL | |
M-547 | M-133 | 1µm | SST Frit | F-112, P-416 | 1/32" (790µm) | 22nL | |
M-548 | M-134 | 1µm | Ti Frit | F-112, P-416 | 1/32" (790µm) | 22nL | |
Filter Capsule Color Identtification | |||||||
MINI MICROFILTER ASSEMBLY | ||
Artikelnummer | Beschreibung | |
For use with MicroTight Tubing Sleeves for capillary tubing | ||
M-530 | 2µm
Mini MicroFilter Assembly, SST Screen Includes (5) 2µm M-122 Filter Capsules, (2) F-172 and (2) P-416 Fittings |
|
M-531 | 1pm Mini MicroFilter Assembly, SST Screen Includes (5) 1 pm M-121 Filter Capsules, (2)F-172 and (2) P-416 Fittings | |
For direct-connect use of 360µm OD capillary tubing | ||
M-532 | 2µm
Mini MicroFilter Assembly, SST Screen |
|
M-533 | 1µm
Mini MicroFilter Assembly, SST Screen Includes (5) 1 µm M-123 Filter Capsules, (2) F-152 and (2) P-416BLK fittings |
|
M-537 | 1µm Mini MicroFiIterAssembly, SST Frit Includes (5) 1 µm M-125 NanoFilter" Capsules, (2) F-152 and (2) P-416BLK Fittings | |
M-538 | 1µm
Mini MiuoFilter Assembly, Ti Frit Includes (5) 1 M-126 NanoFilter Capsules, (2) F-152 and (2) P-416BLK Fittings |
|
For direct-connect use of 1/32" OD tubing | ||
M-542 | 2µm
Mini MiuoFilter Assembly, SST Screen Includes (5) 2µm M-1 32 Filter Capsules, (2) F-112 and (2) P-416 Fittings |
|
M-543 | 1 µm
Mini MiuoFilter Assembly, SST Screen Includes (5) 1 µm M-131 Filter Capsules, (2) F-112 and (2) P-416 Fittings |
|
M-547 | 1 µm Mini MiuoFilter Assembly, SST Frit Includes (5) 1 µm M-1 33 NanoFllter Capsules, (2) F-112 and (2) P-416 Fittings | |
M-548 | 1 µm Mini MiaoFilter Assembly, l i Frit Includes (5) 1 µm M-134 NanoFilter Capsules, (2) F-112 and (2) P-416 Fittings | |
Conductive, for direct-connect use with 360µm OD tubing | ||
M-534 | 1 µm
Conductive Mini MicroFiIterAssembly, SST Frit Includes (5) 1 µm M-1 28 NanoFilter Capsules, (2) F- 152 and (2) P-416BLK Fittings |
REPLACEMENT MINI MICROFILTER CAPSULES | |||
Artikelnummer | Beschreibung | Menge | |
For use with M-530 and M-531 | |||
M-121 | 1 µm Filter Capsule, PEEK with SST filter screen | 2-pk | |
M-122 | 2µm Filter Capsule, PEEK with SST filter screen | 2-pk | |
For use with M-532 and M-533 | |||
M-123 | 1 µm Filter Capsule, PEEK with SST filter screen | 2-pk | |
M-124 | 2µm Filter Capsule, PEEK with SST filter screen | 2-pk | |
For use with M-537 and M-538 | |||
M-125 | 1µm NanoFilter Capsule, PEEK with SST frit | 2-pk | |
M-126 | 1µm NanoFilter Capsule, PEEK with Ti frit | 2-pk | |
For use with M-547 and m-548 | |||
M-133 | 1µm NanoFilter Capsule, PEEK with SST frit | 2-pk | |
M-134 | 1µm NanoFilter Capsule, PEEK with TI frit | 2-pk | |
Conductive, For use with M-534 | |||
M-128 | 1µm Conductive NanoFilter Capsule, SST/PEEK with SST Frit | 2-pk |
INLINE
MICROFILTERS - 100% Biocompatible PEEK™ Polymer Option Available / As low as 109nL Void Volume |
|
Upchurch Scientific® Inline MicroFilters protect your column from particles originating in the mobile phase or sample, or from pump seal and sample injection valve wear. These filters have a .006" (150µm) thru-hole, and come complete with five PEEK polymer end fittings, each containing a filtering frit. Choose the M-520 with a 0.5µm 100% PEEK frit or the M-135 1.0µm stainless steel filtering screen version, with total theoretical void volumes of 240nL and 109nL, respectively (please see the Mini MicroFilter for more information regarding the micro screen incorporated into the M-135). Also included are two F-125 Micro Fingertight Fittings, designed to work with our MicroTight® Tubing Sleeves and capillary 70-520µm OD tubing. Replacement PEEK Filter End Fittings are available in 10 packs. These filters are pressure rated to 4,000 psi (276 bar). |
PRECOLUMN
MICROFILTERS - Direct Connects to Most Columns with 10-32 Threads / total Void Volume of 0.5µL |
|
These Precolumn MicroFilters have 10-32 standard male threads for direct connecting into your microbore or analytical column. Total theoretical void volume is only 0.5µL (includes frit volume) and the PEEK tubing used in the assembly of these units has a .005" (125µm) ID, virtually eliminating any mixing. Two types of filter assemblies are available: one for standard 1/16" OD tubing, the other for 70-520µm OD capillary tubing using our MicroTight Tubing Sleeves. Each Upchurch Scientific MicroFilter Assembly comes complete with 0.5µm replacement stainless steel or PEEK frits, and is pressure rated to 4,000 psi (276 bar). |
Artikelnummer | Beschreibung | Menge | ||
INLINE MICROFILTERS | ||||
For use with MicroTight Tubing Sleeves for capillary tubing | ||||
M-520 | 0.5µm
Inline MicroFilter Assembly, PEEK Frit Includes (5) 0.5µm M-120 MicroFilter End Fittings and (2) F-125 Fittings |
|||
M-135 | 1.0µm
Inline MicroFilter Assembly, SST Screen |
|||
REPLACEMENT INLINE MICROFILTER END-FITTINGS | ||||
M-120x | End-Fittings, Black, with 0.5µm PEEK Frit | 10-pk | ||
PRECOLUMN MICROFILTER ASSEMBLES | ||||
For use with MicroTight Tubing Sleeves for capillary tubing | ||||
M-500 | O.5µm
Precolumn MicroFilter Assembly, SST Frit Includes (5) 0.5µm C-425 Frits, (1) F172 and (1) P-416 Fitting |
|||
M-510 | O.5µm
Precolumn MicroFilter Assembly, PEEK Frit Includes (5) 0.5µm A-735 Fete, (1) F-172 Ferrule and (1) P-416 Fitting |
|||
For use with 1/16" OD tubing | ||||
M-550 | 0.5µm
Precolumn MicroFilter Assembly, SST Frit Includes (5) 0.5µm C-425 Frits, (1) F-132 Ferrule and (1) P-416 Hitting |
|||
M-560 | 0.5µm
Precolumn MicroFilter Assembly, PEEK Frit Includes (5) 0.5µm A-735 Fries, (1) F-132 Ferrule and (1) P-416 Fitting |
|||
Replacement Precolumn MicroFilter Frits | ||||
Artikelnummer | Beschreibung | Popsity | Menge | |
A-735x | PEEK Frits,.045"x.031"x.192" | 0.5µm | 10-pk | |
C-420 | SST Frits,.038" x.025" x.192" | 2.0µm | ea. | |
C-425 | SST Frits,.038" x.028" x.192" | 0.5µm | ea. Mindestabnahme 25 Stück |
CAPILLARY
SAMPLE TRAP COLUMNS - Optimized for Protein and Peptide Separation/Purification / Nonconductive and Conductive Options / Packed and Unpacked Columns |
|
Upchurch
Scientific® Capillary Sample Trap Columns are ideal for separating and
concentrating and/or purifying biological samples. The heart of the Sample
Trap is a fused silica capillary column. Available prepackaged capillary
columns include: reversed-phase C18, high-carbon load, 5µm/300Ä spherical
silica, and an SCX (Strong Cation Exchange) 5µm/85A material. Each column
supports a recommended maximum sample loading capacity of approximately
0.1 µg with a capillary bed volume at 0.19µL or less. Unpacked and
Conductive Column Assemblies are also available. Capillary Sample Trap Column Assemblies include one or more 1 µm NanoFilter™ Capsules, each containing either a stainless steel (SST) or biocompatible titanium (Ti) frit. The swept volume of these unique filters is only 10nL each. Connect your 360µm OD capillary tubing directly to our Sample Trap Column Assemblies using the fittings provided. Each Capillary Sample Trap Column Assembly is rated to 5,000 psi (345 bar). The maximum flow rate for these products is 10µL/min; 250nL is the optimal flow rate. |
|
The
Conductive Sample Trap Columns allow voltage to be applied to the flow
stream via stainless steel filter holders and NanoFilter Capsules. Apply
voltage easily using our Insulating Mounting Bracket. These products are
perfect for integration into CE or mass spectrometry systems. Try our Column Coupler, which makes it possible to directly connect two or more columns in sequence. Please contact us for more information on our Capillary Sample Trap Columns. |
SAMPLE TRAP COLUMN ASSEMBLY COMPONENTS CHART Please refer to the drawing and part number below when ordering replacement components | ||||||
Column Assembly | Nuts (a) | Ferrules (b) | Filter Holder Color (c) | NanoFilter (d) | Column (e) | Capsule Union or Nano Filter (f) |
Non-Conductive | ||||||
C-1200 | P-416 | F-152 | Tan | M-125 (SST) | C-1250 (C18) | M-124NF (no frit) |
C-1300 | P-416BLK | F-152 | Tan | M-126 (Ti) | C-1250 (C18) | M-124NF (no frit) |
C-1500 | P-416 | F-152 | Tan | M-125 (SST) | FS-1000-25 (unpacked) | M-125 (SST) |
C-1600 | P-416BLK | F-152 | Tan | M-126 (Ti) | FS-1000-25 (unpacked) | M-126 (Ti) |
All nuts, ferrules, and column holders are made of PEEK™ polymer. Filter holders are made of PEEK polymer (non-conductive) or stainless steel (conductive). NanoFilter Capsule bodies are made of PEEK polymer (non-conductive) or stainless steel and PEEK (conductive) Abbreviation Key: SST = stainless steel; Ti = titanium; SCX = Strong Cation Exchange |
EXAMPLE SEPERATION CHROMATOGRAM OF FIVE ANGIOTENSINS | ||
Chromatographic Conditions, using C18 Sample Trap Column: | ||
Binary Gradient | A: Water; B: Acetonitrile w/0.1% Formic Acid | |
Gradient Profile | 2% B for 0.1 minutes Ramp to 95% B over 10 minutes Hold at 95% B for 4minutes return to 2% B over 1 minute | |
Flow Rate | 250nL/minute | |
Injected Amount | = 500 femtomoles per peptide |
INSULATING MOUNTING BRACKET | |
Insulating Mounting Bracket, shown with lead wire and Conductive Micro Tight Union , not included. | Upchurch Scientific® products into your system or lab: |
CAPILLARY SAMPLE TRAP COLUMNS | ||||||
Artkelnummer | Beschreibung | |||||
Assemblies, Non-Conductive (1) | ||||||
C-1200 | C18 Column, SST Frit Includes (1) 2-pk C-1250 Columns and (1) M-125 NanoFilter | |||||
C-1300 | C18 Column Ti Frit Includes (1) 2-pk C-1250 Columns and (1) M-126 NanoFilter | |||||
C-1500 | Unpacked Column, SST Frits Includes (1) FS-1000-25 Column and (1) 2-pk M-125 NanoFilters | |||||
C-1600 | Unpacked Column, Ti Frits Includes (1) FS-1000-25 Column and (1) 2-pk M-126 NanoFilters | |||||
Column Coupler and Replacement Parts (1) | ||||||
Artikelnummer | Beschreibung | Swept Volume | Menge | |||
C-1210 | Column Coupler, PEEK | - | ea. | |||
C-1250 | C18 Columns, 100µm ID x 2,5cm x 360µm OD | - | 2-pk | |||
F-152 | MicroFerrule for 360µm OD tubing, PEEK | - | ea. | |||
FS-1000-25 | Unpacked Column, 100µm ID x 2,5cm x 360µm OD | - | ea. | |||
M-124NF | Capsule Union, no Frit, PEEK | 9.5nL | ea. | |||
M-125 | 1µm NanoFilter Capsules, with SST Frits | 10nL | 2-pk | |||
M-126 | 1µm NanoFilter Capsules, with Ti Frits | 10nL | 2-pk | |||
M-128 | 1µm Conductive NanoFilter Capsules, SST Frits | 10nL | 2-pk | |||
M-128NF | Conductive Capsule Union, no Frit, SST | 13nL | ea. | |||
P-416 | Female Nut, Natural PEEK | - | ea. | |||
P-416BLK | Female Nut, Black PEEK | - | ea. | |||
P-416G | Female Nut, Green PEEK | - | ea. | |||
INSULATING MOUNTING BRACKET | ||||||
Artikelnummer | Beschreibung | |||||
M-447 | insulating Mounting Bracket | |||||
(1) Please refer to the Components Chart for a full list of replacement parts for each assembly. SST=Stainless Steel, Ti = Titanium |
NANOTIGHTTM
FITTINGS AND SLEEVES - For Connecting Capillary Tubing to Standard 10-32 Coned Ports / 10-32 Fittings and 1/16" OD Sleeves for Capillary Tubing Sizes from 70pm - lmm OD |
|
Upchurch
Scientific® NanoTight Fittings and Sleeves are designed to connect 70µm -
1 mm OD capillary tubing to any standard 10-32 coned port normally
intended for 1/16" OD tubing. Select the sleeves appropriate for the
OD of your capillary tubing. For instance, choose F-239x for 190µm OD
tubing, F-242x for 360µm OD tubing, and F-247x for 1/32" OD tubing.
Each sleeve is color-coded for easy identification. The 1.6" long Teflon® FEP NanoTight Sleeves withstand up to 50°C, and can be finger tightened to hold to 4,000 psi (276 bar) when using our NanoTight Fittings. For added convenience, try the NanoTight Kits, which include four F-330N NanoTight Fittings and ten NanoTight Tubing Sleeves. Select from our expanded line of PEEK NanoTight Fittings, featuring several head style and length options. Each 10-pack of nuts includes ten Tefzell F-142N Ferrules. |
NANOTIGHT FITTINGS | ||||
All NanoTight Nut 10-packs include a 10-pack of Ferrules (F-142Nx) | ||||
Artikelnummer | Bescheibung | Bild | Menge | |
F-142Nx | Ferrules, Natural Tefzel (ETFE) | 10-pk | ||
F-330N | Long Nuts, Std. Head, Natural PEEK, 10-32 | ea. Mindestabnahme 25 Stück | ||
F-331N | Short Nuts, Std. Head, Natural PEEK, 10-32 | ea. Mindestabnahme 25 Stück | ||
F-332N | Short Nuts, Hex Head, Natural PEEK, 10-32 | ea. Mindestabnahme 25 Stück | ||
F-333Nx | Short Nuts, Headless, Natural PEEK, 10-32 | 10-pk | ||
F-334N | Long Nuts, Knurl/Hex Fat Head, Natural PEEK, 10-32 | ea. Mindestabnahme 25 Stück | ||
F-335N | Long Nuts, Hex Head, Natural PEEK, 10-32 | ea. Mindestabnahme 25 Stück | ||
F-336N | Long Nuts, Headless, Natural PEEK, 10-32 | ea. Mindestabnahme 25 Stück |
NANOTIGHT FEP TUBING SLEEVES, 1/16" OD | |||||
Artikelnummer | ID | For Tubing OD Size | Color | Menge | |
F-237 | 125µm (.005") | 70 - 110µm | Red | ea. | |
F-238 | 180µm (.007") | 125-165µm | Yellow | ea. | |
F-239 | 215µm (.0085") | 160-200µm | Natural | ea. | |
F-240 | 280µm(.011") | 225 - 265µm | Blue | ea. | |
F-241 | 330µm (.013") | 275-315µm | Orange | ea. | |
F-242 | 395µm (.0155") | 340-380µm | green | ea. | |
F-243 | 455µm (.018") | 400-440µm | Black | ea. | |
F-244 | 535µm (.021") | 480-520µm | Natural | ea. | |
F-245 | 610µm (.024") | 555-595µm | Red | ea. | |
F-246 | 685µm (.027") | 630-670µm | Yellow | ea. | |
F-247 | 840µm (.033") | 785-825µm | Green | ea. | |
F-252 | 1.07mm (.042") | 1mm | Purple | ea. | |
NANOTIGHT KITS | |||||
Artikelnummer | Beschreibung | ||||
1238 | F-238x Tubing Sleeves and Fittings Kit | ||||
1239 | F-239x Tubing Sleeves and Fittings Kit | ||||
1240 | F-240x Tubing Sleeves and Fittings Kit | ||||
1241 | F-241x Tubing Sleeves and Fittings Kit | ||||
1242 | F-242x Tubing Sleeves and Fittings Kit | ||||
1243 | F-243x Tubing Sleeves and Fittings Kit | ||||
1244 | F-244x Tubing Sleeves and Fittings Kit | ||||
1245 | F-245x Tubing Sleeves and Fittings Kit | ||||
1246 | F-246x Tubing Sleeves and Fittings Kit | ||||
1247 | F-247x Tubing Sleeves and Fittings Kit | ||||
1252 | F-252x Tubing Sleeves and Fittings Kit | ||||
1250 | NanoTight
Connector Kit (5) each of F-330N and F-331 N NanoTight Fittings; (5) each of F-335N and F-336N NanoTight Fittings; and (2) P-779-01 NanoTight Unions. |
NANOTIGHTTM
UNIONS |
NANOTIGHT
Y CONNECTOR - Only 17nL of Swept Volume |
|
Upchurch
Scientific® NanoTight Unions improve capillary tubing connections in
several ways. The sleeving system and internal design of the unions
greatly reduce the incidence of tubing misalignment. The webbed thru-hole
minimizes breaking of fused silica at the junction point while adding only
miniscule swept volume (8nL for the P-779-01 and 13nL for the U-411). The
results are fewer blockages, fewer flow rate reductions and fewer back
pressure problems. Connect capillary tubing with these unions using the NanoTight Fittings and Sleeves listed on page 38. These versatile unions can also be used to connect capillary tubing to 1/16" OD tubing, or to connect two 1/16" OD tubing lines. To connect 1/16" OD tubing with our P-779-01, use any standard polymer 10-32 coned fittings, such as our NanoTight Fittings. To connect 1/16" OD tubing with our U-411, use the included fittings. The pressure holding capability of the NanoTight Unions depends on the fittings and tubing sleeves selected. Please refer to the pressure ratings of these products. |
This
product improves laminar flow over traditional MicroTee designs. The
result is less turbulence and mixing when combining two fluid paths into
one, or splitting one fluid path into two. This assembly holds to 4,000
psi (276 bar), has a .006" thru-hole, and a swept volume of only
17nL. The Upchurch Scientific NanoTight Y Connector uses an included 1.6" long Dual-Lumen Silica NanoTight Tubing Sleeve to accommodate two 360µm OD capillary tubing lines. The single inlet/outlet end of the Y Connector uses the included F-242 NanoTight Tubing Sleeve, also designed for 360µm OD capillary tubing. The NanoTight Y Connector comes complete with NanoTight Fittings. The body of this product is made of PEEK™ polymer, while both of the included tubing sleeves are made of Teflon® FEP. Replacement NanoTight Tubing Sleeves and fittings are available on page 38. Use F-242 replacement sleeves or choose from the other available sleeves to connect capillary tubing with ODs ranging from 70µm to 1 mm. Dual-Lumen F-235 Sleeves are listed below, and are only available for 360µm OD tubing. |
NANOTIGHT UNIONS | |||||
Artikelnummer | Beschreibung | Threads | Thru-hole | Swept Volume | |
P-779-01 | Union, PEEK, Natural | 10-32 to 10-32 | .005" (130µm) | 8nL | |
U-411 | Union, Stainless Steel Includes (2) U-400 and (2) | 10-32 to 10-32 | .007" (180µm) | 13nL |
MICRO STATIC MIXING TEE | CONDUCTIVE
PERFLUOROELASTOMER FERRULE - For Mass Spec Electrospray Applications |
The Upchurch
Scientific® Micro Static Mixing Tee has a low swept volume of only .95µL
and is designed for flow rates of 20-250µL/min. The center port features
a 0.5µm PEEK™ polymer frit to aid in mixing. This frit adds a maximum
of 20 psi (1.4 bar) back pressure to most systems (within the stated flow
rate range). Constructed of PEEK and Kel-F® (PCTFE), this mixing tee is
chemically resistant and biocompatible. It handles a maximum pressure of
5,000 psi (345 bar). Connect capillary tubing using our NanoTight™
Sleeves. No sleeves are required for 1/16" OD tubing. |
Try the
Upchurch Scientific Conductive Perfluoroelastomer Ferrule in your
electrospray applications. Unlike most graphite ferrules, the elastomeric
properties of this ferrule let you use it through many tightening/
retightening cycles. It also eliminates any possibility of graphite
contamination in your system. The robust qualities of perfluoroelastomer
allow the ferrule to be used at temperatures from -15°C to 260°C. Connect 360µm OD fused silica or PEEK polymer tubing into any standard 10-32 coned port designed for 1/16" OD tubing with this ferrule. Like graphite ferrules, you can apply voltage through a metallic port block or metallic nut, allowing voltage to translate to the flow path through the ferrule. Use the Conductive Perfluoroelastomer Ferrule with any of the Fingertight Nuts listed on page 14 or NanoTight™ Nuts. To order one of these nuts without its standard ferrule, replace the "x" at the end of the nut's product number with "-01 ". Please Note: the "-01 " denotes a single nut without the accompanying ferrule. |
MICRO STATIC MIXING TEE |
|||||||
Artikelnummer | Beschreibung | Thru-hole | Swept Volume | ||||
M-540 | Micro Static Mixing Tee'; for 1/16" OD tubing Includes (3) F- 132 and (3) P-416 Fittings | .010" (25mm) | .95µL (1) | ||||
CONDUCTIVE PERFLUOROELASTOMER FERRULE | |||||||
Artikelnummer | Beschreibung | Menge | |||||
M-215 | Conductive Perfluoroelastomer Ferrule, Black For 360µm OD Tubing | ea. | |||||
(1)
Includes fret volume (2) The frit in this product cannot be changed, |
1/16"
OD PEEK™ TUBING SLEEVES -For Connecting Capillary Tubing to Standard 10-32 Ports / Require the Use of Wrench Tightened Stainless Steel Nuts Like the NanoTight™ FEP Sleeves, these PEEK Tubing Sleeves are designed to be used with 1/16" OD, 10-32 threaded fittings to adapt capillary tubing to standard coned ports. Made of PEEK polymer, these 1.3" long sleeves can be used up to 125°C and will hold to 6,000 psi (414 bar). Please Note: These sleeves require a wrench tightened stainless steel nut to achieve proper sealing. We recommend our F-140 Two-Piece Fingertight Fitting, which includes a PEEK ferrule. Many researchers also use a stainless steel nut and ferrule with these sleeves, such as our U-400 and U-401. For a less expensive alternative that doesn't require wrench tightening, consider our NanoTight Tubing Sleeves and Kits. |
|
1/32" OD TEFLON®
FEP TUBING SLEEVES These 1.6" long sleeves facilitate connecting capillary tubing into ports designed for 1/32" OD tubing. Please refer to the product listing below to select the appropriate sleeve for your capillary OD size. For instance, choose F-376 for 360µm OD and F-373 for 190µm OD capillary tubing. These sleeves are pressure rated to 1,750 psi (121 bar) and can be used at up to 50°C. |
1/32"
OD PEEK TUBING SLEEVES Upchurch Scientific® 1/32" OD PEEK Tubing Sleeves are specifically designed to connect capillary tubing to our Nano Flow Sensor and 6-32 NanoPeak™ Valves. The 1.6" long sleeves can also be used with any fitting designed for 1/32" OD tubing when smaller tubing must be connected. Select the appropriate sleeve from the product listing for your capillary tubing OD size. The 1/32" OD PEEK Tubing Sleeves have a pressure rating of 5,000 psi (345 bar) and a maximum recommended temperature of 125° C. |
1/16" OD PEEK TUBING SLEEVES | |||||
Artikelnummer | ID | For Tubing OD Size | Color | Menge | |
F-225 | 125µm (.005") | 70 - 110µm | red | ea. | |
F-226 | 180µm (.007") | 125-165µm | Yellow | ea. | |
F-227 | 230µm (.009") | 175-215µm | Yellow | ea. | |
F-228 | 250µm (.011") | 225-265µm | Blue | ea. | |
F-229 | 330µm (.013") | 275-315µm | Natural | ea. | |
F-230 | 405µm (.016") | 350-390µm | Orange | ea. | |
F-231 | 560µm (.022") | 505-545µm | natural | ea. | |
F-234 | 885µm (.027") | 630-670µm | Yellow | ea. | |
F-232 | 785µm (.031") | 730-770µm | Natural | ea. | |
F-233 | 865µm (.034") | 785-825µm | Blue | ea. | |
1/32" OD PEEK TUBING SLEEVES | |||||
F-380 | 125µm (.005") | 70-110µm | Red | ea. | |
F-381 | 180µm (.007") | 125- 765µm | Yellow | ea. | |
F-382 | 205µm (.008") | 150-190µm | Natural | ea. | |
F-383 | 230µm (.009") | 175-215µm | Gray | ea. | |
F-384 | 255µm (.010") | 200-240µm | Blue | ea. | |
F-387 | 250µm (.011") | 225-265µm | red | ea. Mindestabnahme 25 Stück | |
F-388 | 330µm (.013") | 275-315µm | Black | ea. | |
F-385 | 380µm (.015") | 325-365µm | Natural | ea. | |
F-386 | 510µm (.020") | 455-495µm | Orange | ea. | |
1/32" OD TEFLON FEP TUBING SLEEVES | |||||
F-370 | 75µm (.003") | 20 -60µm | Natural | ea. | |
F-371 | 125µm (.005") | 70-110µm | red | ea. | |
F-372 | 180µm (.007") | 125 - 165µm | Yellow | ea. | |
F-373 | 230µm (.009") | 175-215µm | Natural | ea. | |
F-374 | 280µm (.011") | 225-265µm | Blue | ea. | |
F-375 | 330µm (.013") | 275-315µm | Orange | ea. | |
F-376 | 395µm (.0155") | 340-380µm | Green | ea. |
RHEFLEX®
M4 FITTINGS For Coned Ports For 1/32" OD Tubing |
VICI®
(VALCO)-COMPATIBLE FITTINGS, 6-40
THREADS For Coned Ports For 1/32" OD and Capillary Tubing |
The Rheodyne® RheFlex M4 Fitting is designed to connect 1/32" OD tubing in MX Module applications. This PEEK™ fitting has a one piece design, which eliminates the need for a separate nut and ferrule. The M4 Fitting design provides dependable zero dead volume connections for micro and nano applications. Due to the unique RheFlex gripping design, the M4 Fitting will hold to 5,000 psi (345 bar) on PEEK or fused silica tubing. A PEEK M4 Plug is also available. Use Rheodyne ChromTRAC™ knobs with the RheFlex M4 Fittting for fingertight convenience and to color-code connections. | The Upchurch Scientific™ M-645 Fitting for 1/32" OD tubing is a robust, one-piece alternative for the Valco Nanovolume™ 6-40 threaded fitting. Our product consists of a PEEK polymer nut and an integrated Kel-F® (PCTFE) ferrule. Capillary tubing can also be connected with this fitting using the 1/32" OD Teflon® Tubing Sleeves. Please refer to the table below for pressure rating data. Also available is the P-552 Plug, for unused 6-40 threaded Valco ports. |
PRESSURE RATINGS | |||
Fitting for Valco-Compatoble 6-40 Port M-645 | 1/32" OD Tubing Sleeves | Tubing | Pressure rating |
- | FEP, 1/32" OD x.005" ID | 3,000psi (207bar) | |
- | PEEK, 1/32" OD x.005" ID | 2,750psi (190 bar) | |
- | Stainless Steel, 1 /32" OD x.005" ID | 3,250psi (224 bar) | |
F-376, 395µm ID | FEP, 360µm OD x 75µm ID | 1,750psi (121 bar) | |
F-376, 395µm ID | PEEK, 360µm OD x 75µm ID | 1,750psi (121 bar) | |
F-376, 395µm ID | Fused Silica, 360µm OD x 75µm ID | 1,750psi (121 bar) | |
This chart is intended for reference only and refers to the pressure rating of the fittings. NOT the tubing. Tests were conducted with room temperature water as the solvent. Your results may vary depending on the specific port and tubing materials tubing ID, actual tubing diameters (with manufacturers' tolerances), temperature, chemical compatibility, etc. The fittings were finger tightened for these tests. |
Artikelnummer | Bild | Beschreibung | Menge | |
RHEFLEX FITTINGS FOR CONED PORTS | ||||
6000-360 | M4 RheFlex Fittings, for 1/32" OD Tubing, Natural PEEK | 10-pk | ||
VICI (VALCO)-COMPATIBLE FITTINGS FOR 6-40 CONED PORTS | ||||
M-645 | Fittings for 1/32" DD Tubing, Natural PEEK/Kel-F | ea. | ||
P-552 | Plug for 1/32" OD Tubing Port, Natural PEEK/Kel-F | ea. |
LEE COMPANY
"MINSTAC®" COMPATIBLE FITTINGS, 6-40 THREADS
For MINSTAC Valve Ports - Easy to Use / For 1/16" Ob and Capillary Tubing |
SUPER
FLANGELESS FITTINGS, 6-40 AND 6-32 THREADS
For Flat-Bottom Ports - For 1/16" OD and Capillary Tubing |
Upchurch
Scientific® TinyTight™ Fittings are easy-to-use alternatives for Lee
Company 062 MINSTAC fittings systems. These Upchurch Scientific fittings
consist of a 6-40 threaded PEEK™ polymer nut and a TinyTight Ferrule. To
use, simply slide a fitting head-first onto your tubing, followed by the
ring and ferrule, and thread this assembly into the solenoid valve
receiving port, while making sure the tubing is bottomed out. No collets,
colleting tools or chamfering tools required! Choose from two ferrule options, with .020" and .030" thru-holes. Both are designed to connect 1/16" OD tubing. You may also connect capillary tubing having outside diameters from 70µm to 1 mm with these ferrules, using our NanoTight™ Sleeves. |
This Upchurch
Scientific fittings system connects 1/16" OD and capillary tubing
into any flat-bottom 6-40 or 6-32 threaded port. The 316 stainless steel
ring of the Super Flangeless system offers constant, uniform compression
on the ferrule while operating as a bearing against the nut. Thus, the nut
can spin freely against the ferrule system, preventing the tubing from
twisting during the tightening process. Once swaged, the lock ring holds
the ferrule in place on the tubing, a benefit that also makes this
fittings style ideal for tubing assemblies since the ferrule keeps the nut
from sliding off the tubing. Connect 1/16" OD tubing into 6-40 flat-bottom ports using the M-650 Ferrule and M-644-03 Nut. For 6-32 flat-bottom ports, use the M-650 Ferrule with the M-660 Nut. Use our Teflon® FEP NanoTight Sleeves with these fittings to connect capillary tubing with OD sizes between 70µm and 1 mm. Both headless nuts are made of PEEK polymer. For easy tightening, try our N-290 Extender Tool on. |
TINYTIGHT SWAGING TOOL | |
Make quick and easy 6-40 TinyTight tubing assemblies with this new tool. The tool is specifically designed for use with the Upchurch Scientific M-647 and M-657 Ferrules, 6-40 threaded M-644-03 Nut and 1/16" OD tubing. To use, first place the tool in a vise, then tighten tubing, fitting and ferrule into the tool as you would into any port. Once removed, the swaged ferrule will be held in place on the tubing. |
PRESSURE RATINGS | |||
1/16" OD Tubing Sleeves | Tubing | Pressure Ratings | |
Fittings for
MINSTAC• Compatible 6-40 Port M-647 / M-657 M-644-03 |
- - - |
FEP,1/16"ODx.010"ID PEEK, 1/16" OD x.010" ID Stainless Steel, 1/16" OD x.010" ID |
600 psi (41 bar) 1,500 psi (103 bar) 4,000 psi (276 bar) |
Fittings for 6-40
Port M-650, M-644-03 |
- - - F-376, 395µm ID | FEP,1/16"ODx.010"ID PEEK, 1/16" OD x.010" ID Stainless Steel, 1/16" Of x.010" ID Fused Silica, 360µm OD x 75µm ID |
1,750 psi (121
bar) 3,750 psi (259 bar) 3,750 psi (259 bar) 750 psi (52 bar) |
Fittings for 6-32
Port M-650, M-660 |
- - - F-376, 395µm ID | FEP, 1/16"
OD x.010" ID PEEK, 1/16" OD x.010" ID Stainless Steel, 1/16" OD x.010" ID Fused Silica, 360µm OD x 75µm ID |
1,750 psi (121
bar) 3,750 psi (259 bar) 3,750 psi (259 bar) 750 psi (52 bar) |
This chart is intended for reference only and refers to the pressure rating of the fittings, NOT the tubing. Tests were conducted with room temperature water as the solvent. Your results may vary depending on the specific port and tubing materials, tubing ID, actual tubing diameters (within manufactures´tolerances), temperature, chemical compatibility, etc. The fittings were finger tightened for these tests |
Artikelnummer | Beschreibung | Bild | Menge | |
LEE COMPANY-COMPATIBLE FITTINGS FOR 6-40 PORTS | ||||
M-644-03 | Headless Nuts for 1/16" OD tubing, Green PEEK | ea. | ||
M-647 | TinyTight
Ferrules for 1/16" OD tubing, .020" thru-hole, Natural PEEK/SST |
ea. | ||
M-657 | TinyTight
Ferrules for 1/16" OD tubing, .030" thru-hole, Black PEEK/SST |
ea. | ||
SUPER FLANGELESS FITTINGS FOR 6-40 AND 6-32 FB PORTS | ||||
M-644-03 | Headless Nuts for 1/16" OD tubing, 6-40, Green PEEK | ea. | ||
M-650x | Ferrules for 1/16" OD tubing, Natural PEEK/SST | 10-pk | ||
M-650 | Headless Nuts for 1/16" OD tubing, 6-32, Natural PEEK | ea. | ||
TINYTIGHT SWAGING TOOL | ||||
M-150 | 6-40 Tiny'right Swaging Tool, SST | |||
FB = Flat-Bottom; SST = Stainless Steel |