Hochdruckverschraubungen und Kapillare für die HPLC

Schrauben einteilig ONE-PIECE, HIGH TEMPERATURE FINGERTIGHT FITTING For Coned Ports nähere Angaben
Schrauben zweitilig TWO PIECE, ULTRA HIGH PRESSURE FITTINGS For Coned Ports nähere Angaben

ONE-PIECE, HIGH TEMPERATURE FINGERTIGHT FITTING
Artikelnummer Beschreibung Menge  
PK-120BLKx  Black, 10-3Q for 1/16" OD tubing
 10-pk  
UH-196x SST Nut, with UH-193 Ferrules, 10-32, for 1/16" OD tubing 10-pk  
UH-193x SST Ferrule, for 1/16" OD tubing 10-pk  
UH-296x SST Nut, with UH-293 Ferrules, 10-32 for 1 /32" OD tubing Stck.  
UH-293x SST Ferrule, for 1/32" OD tubing 10-pk  

ONE PIECE FINGERTIGHT FITTINGS INTRODUCTION For Coned Ports For convenience and ease of use, try a One-Piece Fitting. The one-piece design means the ferrule cannot stick in a receiving port, and the fitting is more easily found if dropped. The fittings on this page work best with semi-rigid or rigid tubing materials.
UPCHURCH ONE'PIECE FINGERTIGNT FITTINGS
Upchurch Scientific®s original One-Piece Fingertight Fittings have 10-32 threads and are designed to be used with 1/16" OD tubing, except the M-645 (6-40, 1/32") and P-100 (l/4-28, VW).
The F-120 is Upchurch Scientific's most popular high pressure Fingertight, while the F-195 and F-331 are two-piece versions of this product.
Our M-645 Fitting is a direct replacement for the 6-40 threaded VICI® (Valco) fitting.
Upchurch Scientific One-Piece Fingertight Fittings are rated between 1,000 - 6,000 psi (69 - 414 bar), depending on the fitting.
RHEFLEX® ONE PIECE FINGERTIGHT FITTING Rheodyne®´s 10-32, 1/16" One-Piece Fitting can be used with stainless steel, PEEK, and Teflon tubing. The One-Piece Fitting includes ChromTRACTM knobs in the color of your choice for visual identification and finger tightening of fluid connections. The reusable One-Piece Fitting can be finger tightened to hold 5,000 psi (345 bar).
RheFlex One-Piece Fittings are designed for use with many of the Rheodyne manual valves. The One-Piece RheFlex M4 Fittings, designed for use with Rheodyne MX Nano-Scale Modules.

Upchurch Schrauben einteilig Kel-F Upchurch Schrauben einteilig PEEK

ONE PIECE UPCHURCH FINGERTIGHT FITTINGS
Arikelnummer Beschreibung Menge  
F-100x Kel-F, Red, 10-32, for 1/16" OD tubing 10-pk  
F-100Nx Kel-F, Natural, 10-32, for 1/16" OD tubing 10-pk  
F-120 PEEK, Natural 10-32, for 1/16" OD tubing Stck.  
F-120BLK PEEK, Black 10-32, for 1/16" OD tubing Stck.  
F-120FUNPAC PEEK, Assorted Colors 10-32, for 1/16" OD tubing 6-pk  
F-127 PEEK, Natural 10-32, Short, for 1/16" OD tubing Stck.  
F-130 PEEK, Natural 10-32, Long, for 1/16" OD tubing Stck.  
M-645 PEEK/Kel-F, Natural, 6-40, for 1/32" OD tubing Stck.  
P-100 Kel-F, Natural, 1/4-28, for 1/8" OD tubing
 Stck.  
ONE-PIECE RHEFLEX FINGERTIGHT FITTING
6000-282 PEEK, Natural, 10-32, for 1/16" OD tubing 10-pk  

Rheflex Schrauben

CHROMTRACTM
Brightly colored knobs to easily track inlets and outlets of valves, columns, and detectors

Rheodyne®'s innovative ChromTRAC color-coding system is the industry standard for simplifying your fluid connections. Seven ChromTRAC colors clearly identify tubing lines and visually distinguish different components in the same system. The colored knobs on RheFlex® Fittings allow you to coordinate port to fittings and fittings to system components without confusion. Chrom TRAC Schrauben und Firttings All ChromTRAC-compatible RheFlex fittings offer the ChromTRAC knob option. Specify the ChromTRAC two letter suffix for the color choice when ordering (please see the ChromTRAC Suffix Codes table below. "MC" refers to "multi-color" which includes two each of blue, green, gray, red, and yellow). For example, to order red ChromTRAC knobs with the RheFlex One-Piece Fitting, specify 6000-282RD. No suffix indicates black knobs.

Artikelnummer Material Max.Druck (psi/bar) Tubing Größe, Threads/ Port Note
One-Piece, High Temperature Fitting
Pk-120BLK PK 6,000 (414) 1/16", 10-32 C 2,3
One-Piece Fittings
F-100,F-100N Kel-F® 4,000 (276) 1/16", 10-32 C  
F-120, F-120BLK, F-127, F-130 PEEK™ 6,000 (414) 1/16", 10-32 C 2
M-645 PEEK/ Kel-F 1,750-3,250 (121-224) 1/32",6-40C 2
P-100 Kel-F 1,000 (69) 1/8", 1/4-28 C  
6000-282 PEEK 5,000 (345) 1/16", 10-32 C  
Ferrules for Rheodyne Two-Piece Fittings
6000-251 PEEK 7,000 (483) 1/16", 10-32 C 2
6000-079 PEEK 5,000 (345) 1/8",5/16-24C 2
Seal Tight™ Ferrules
F-192 PEEK 3,000-9,000 (207-620) 1/16", 10-32 C, M6 C 2
Ferrules for Upchurch Two-Piece Fittings
F-113 PEEK 3,500-6,000 (241-414) 1/32", 10-32 C 2,5
F-142 PEEK 6,000 (414) 1/16", 10-32 C 2,6
F-142N Tefzel® 1,750 (121) 1/16", 10-32 C  
F-148 Kel-F 6,000 (414) 190µm, 10-32 C  
F-151 Kel-F 6,000 (414) 360µm, 10-32 C  
M-215 Perfluoroelastomer 1,500 (103) 360µm, 10-32 C 7
LiteTouch® Ferrules
LT-132 PEEK w/SST ring 5,000 (345) 1/32",10-32 C 2
LT-100 PEEK w/SST ring 5,000 (345) 1/16", 10-32 C 2
LT-135 PEEK w/SST ring 15,000 (1,034) 1/16", 10-32 C 2
LT-200 PEEK w/SST ring 4,500 (310) 1/8", 1/4-28 C 2

Ferrules for FIushNut™ Fittings
Uses ferrules from our other systems 700-9,000 (48-620) 1/32",1/16",1/8",
10-32 C, 1/4-28 C, FB		 2
Flangeless SealTight Ferrules
F-290 PEEK 5,000 (345) 1/16", 1/4-28 FB 2
Super Flangeless™ Ferrules
M-650 PEEK w/SST ring 750-3,750 (52-259) 1/16",10-32 FB 2
P-248 Tefzel w/SST ring 2,500 (172) 1/32", 1/4-28/M6FB 2
P-250, P-259, P-260 PEEK or Tefzel w/SST ring 1,800-7,000 (124-483 1/16",1/4-28/M6FB 2
P-350, P-352, P-359, P-360 PEEK or Tefzel w/SST ring 700-5,800 (48-400) 1/8", 1/4-28/M6FB 2
P-355 Kel-F w/SST ring 1,500 (103) 1.8/20mm,1/4-28/M6FB  
NOTES:
 These data are generated under optimal conditions, using water at room temperature (except as noted).
The data presented refers to the capability of the fittings, not the tubing, Your results may vary,
depending on variables such as: the solvent used; the materials of the tubing, port out and ferrule
used; and the temperature at which your analyses are run.

 1) C= coned; FB= flat bottom.

 2.) PEEK and PK are not recommended for use with nitric or sulfuric acid, or halogenated acids (ex. HCl).

 3) Designed for 6.000 psi (414 bar) at gihg temperatures (200°C); 12.000 psi (872 bar) at ambient temperatures.

 4) Pressure ratede to 3.500 psi (241 bar) in plastic ports and to 6.000 psi (414 bar) in metal ports.

 5) Wrench tightens to 10.000 psi (690 bar) when used with SST nut, such as F-140.

 6) Conductive - for electrospray applications

Alle Chromtrac™ suffix codes in folgenden Farben erhältlich
BL Blue
GN Green
GY Gray
RD Red
WH White
YL Yellow
MC Multi-color (two each of blue, green, gray, red and yellow

TWO-PIECE FINGERTIGHT FITTINGS INTRODUCTION
For Coned Ports
Two-Piece Fingertight Fittings feature a separate ferrule. With a two-piece design, you can replace just the ferrule instead of the entire unit, making these Fingertights more economical than the one-piece version.
TWO-PIECE RHEFLEX® FINGERTIGHT
For Coned Ports     nähere Angaben

TWO-PIECE RHEFLEX FINGERTIGHT FITTINGS
Artikelnummer Beschreibung Menge  
6000-251 PEEK Ferrules, for 1/16" OD tubing
 10-pk  
6000-079 PEEK Ferrules, for 1/8" OD tubing 5-pk  
Nuts* (All Two-Piece RheFlex Nuts include the appropriate ferrule(s))
6000-254 Stnd. Length, Natural PEEK, 10-32, for 1/16" OD tubing
 10-pk Rheflex Schrauben 2-teilig  
6000-255 Short, Natural PEEK, 10-32, for 1/16" OD tubing
 10-pk  
6000-078 Stnd. Length, Natural PEEK, 5/16-24, for 1/8" OD tubing
 ea.  
* ChromTRAC compatible, except 6000-078. Specify the two-letter suffix (see ChromTRAC Suffix Codes Table) after the littings's seven-digit part number for the ChromTRAC knob color of your choice, Na suffix indlca[es black knobs.

TWO-PIECE SEALTIGHTTM FINGERTIGHT FITTINGS For Coned Ports Hold up to 9,000 psi (620 bar) with Fingertight Convenience!
The dual compression created by the specially designed nut and ferrule enables the Upchurch Scientific® SealTight Fittings system to outperform standard finger tightened fittings. The forward cone of the SeaITight Ferrule provides gripping power via conventional compression by the receiving port. The slotted end creates the second compression zone in conjunction with a SealTight Nut (The SealTight Ferrule design is similar to that of the RheFlex® Two-Piece Ferrule). All SealTight Nuts are for use with 1/16" OD tubing and are designed to be used with the F-192 Ferrrule. This fittings system is also interchangeable with Two-Piece RheFlex Fittings.

SEALTIGHT PRESSURE RATINGS (PSI/BAR)
Product Tightening Method On PEEK Tubing On Stainless Steel Tubing
F-154, F-190, F-195, F-197 Finger tightened 7,000 (483) 9,000 (620)
F-193, F.194, F-281, F-282 1/2 turn past finger tightened 7,000 (483) 9,000 (620)
F-198, F-284, F-285 Finger tightened Wrench tightened 3,000 (207) 7,000 (483) 3,000 (207) 9,000 (620)
F-287, F-288 Finger tightened 7,000 (483) 9,000 (620)
F-350 Wrench tightened 7,000 (483) 9,000 (620)

TWO-PIECE SEALTIGHT FITTINGS FOR 1/16" 00 TUBING
Artikelnummer Beschreibung Bild Menge  
Ferrule
F-192x SealTight Ferrules, Black PEEK ----------------- 10-pk  
Nuts (All SeaITight Nut 10-pks include a 10-pk of F-192x Ferrules - except F-350x)
F-154 Fernale Nuts, Stnd. Head, Natural PEEK, 10-32 Stck.  
F-190 Stnd. Length Nuts, Stnd. Head, SST, 10-32 Stck.  
F-193 Short Nuts, Hex Head, Black PEEK, 10-32
 Stck.  
F-194 Short Nuts, Hex Head, SST, 10-32
 Stck.  
F-195 Short Nuts, Stnd. Head, Black PEEK, 10-32 Stck.  
F-196 Long Nuts, Stnd. Head, Black PEEK, 10-32 Stck.  
F-197 Long Nuts, Stnd. Head, Black PEEK, M6
 Stck.  
F-198 Short Nuts, Headless, Black PEEK, 10-32 Stck.  
F-281 Long Nuts, Hex Head, Black PEEK, 10-32 Stck.  
F-284x Long Nuts, Headless, Black PEEK, 10-32 ----------------- 10-pk  
F-285 Long Nuts, Headless, Brown PPS, 10-32 Stck.  
F-287 Long Nuts, Knurl/Hex Fat Head, Black PEEK,10-32 10-pk  
F-350 FlushNuts*, SST, 10-32 (order F-192 Ferrules separately)
 Stck.  

TWO-PIECE FINGERTIGHT FITTINGS For Coned Ports
Upchurch Scientific®`s original Two-Piece Fingertight Fittings were designed exclusively for 1/16" OD tubing. We offer optional ferrules for connecting 1/32", 360µm and 190µm OD tubing into coned ports designed for 1/16" OD tubing. These special ferrules work with any Fingertight nut on this page. Our M-215 Conductive Perfluoroelastomer Ferrule is designed for mass spectrometer electrospray applications. To order, please follow these guidelines: 1/16" OD tubing - Select the desired nut, which comes complete with the appropriate ferrule. Or, order the optional F-142N Ferrule, along with the desired nut by replacing the "x" at the end of its product number with "-01 ". For instance, if you want an F-200 Nut, order F-200-01, not F-200x. Please Note: "-O1 " denotes a single nut without the ferrule.
1/32" OD tubing -Select the F-1 13 Ferrule. Orderthe desired nut by replacing the "x" at the end of its product number with "-01 ", as described above.
360µm OD tubing - Select the F-151 Ferrule. For electrospray applications, choose the M-215 Conductive Ferrule. Order the desired nut by replacing the "x" at the end of its product number with "-01 ", as described above.
190µm OD tubing -Select the F-148 Ferrule. Order the desired nut by replacing the "x" at the end of its product number with "-01 ", as described above.



TWO-PIECE POLYMER FINGERTIGHT FITTINGS   
Artikelnummer Beschreibung Menge  
F-200 Delrin Nuts, Red, with F-142 Ferrules, 10-32 Stck.  
F-300x PEEK Nuts, Natural, with F-142 Ferrules, 10-32 10-pk  
F-330x Long PEEK Nuts, Natural, with F-142 Ferrules, 10-32 10-pk  
F-331 Short PEEK Nuts, Natural, with F-142 Ferrules, 10-32 Stck.  
TWO-PIECE STAINLESS STEEL FINGERTIGHT FITTINGS 
F-140 Stainless Steel Nuts with F-142 Ferrules, 10-32    Stck.  
F-150 Long Stainless Steel Nuts with F-142 Ferrules, 10-32    Stck.  
REPLACEMENT FERRULES For 1/16" OD Tubing   
F-142   Stck.  
F-142Nx   10-pk  
For 1/32" OD Tubing
F-113   Stck.  
For 360µm OD Tubing
F-151   Stck.  
M-215   Stck.  
For 190µm OD Tubing
F-148   Stck.  

WRENCHES

For your convenience, we offer wrenches in three standard sizes. You will need two A-304 wrenches to tighten most nuts into unions.  (for unions 1593 and U-352, you need one A-304 and one A-320 wrench).
The Rheodyne Wrench is slotted to fit over 1/16" and 1/8" OD tubing, and has 1/4" and 5/16" ends. !! Weitere Informationen enthalten im unterem Teilabschnitt der folgenden Tabelle !!		 Werkzeuge

STAINLESS STEEL FITTINGS
For Coned Ports
  These 316 Stainless Steel Fittings are rated to 10,000 psi (690 bar) when wrench tightened. Choose Upchurch Scientific Standard Fittings, or select from the Rheodyne RheFlex® or other manufacturer-compatible offerings.

Artikelnummer Beschreibung Menge  
STANDARD STAINLESS STEEL FITTINGS
C-235 Nuts, 1/8", 1/4-28 (use with C-236 Ferrule)
 Stck.  
C-236 Ferrules, 1/8"
 Stck.  
U-400x Nuts, 1/16", 10-32 (use with U-401 Ferrule) 10-pk  
U-401x Ferrules, 1/16" 10-pk  
U-450 Nuts, 1/16", M6 (use with U-401 Ferrule) Stck.  
BECKMAN COMPATIBLE FITTINGS
U-401x Ferrules, 1/16" 10-pk  
U-420 Nuts, 1/16", 10-32 Stck.  
U-443 Long Nut, t/16",10-32  Stck.  
RHEODYNE RHEFLEX FITTINGS
6000-209 Standard Nuts, with 6000-210 Ferrules, 1/1 6", 10-32 10-pk  
6000-211 Long Nuts, with 6000-210 Ferrules, 1/16", 10-32 10-pk  
6000-262 Extra-Long Nuts, with 6000-210 Ferrules, 1/16", 10-32 10-pk  
6000-210 Ferrules, 1/16" 10-pk  
SSI COMPATIBLE FITTINGS
U-350 Nuts, 1 / 16", 1/4-28    Stck.  
U-351 Ferrules, 1/16" Stck.  
TSP/LDC COMPATIBLE FITTINGS
C-235 Nuts, 1/8"`, 1/4-28 (use with C-236 Ferrule) Stck.  
C-236 Ferrules, 1 /8" (for pump inlet) Stck.  
U-401x Ferrules, l/16"(for pump outlet) 10-pk  
U-458 Nut, 1/1 6", 5/16-24 (for pump outlet) (use with U-401 Ferrule) Stck.  
U-459 Nut, 1 /8", 5/16-24 (for pump inlet) (use with U-401 Ferrule)  Stck.  
VICI (VALCO) COMPATIBLE FITTINGS
U-320x Nuts, 1/16", 10-32    10-pk  
U-321x Ferrules, 1/16"  10-pk  
WATERS COMPATIBLE FITTINGS
U-401x Ferrules, 1/16"  10-pk  
U-410 Nuts, 1/16", 10-32    Stck.  
WRENCHES
A-304 Fittings Wrench, 1/4" x 5/16"
 Stck.  
A-305 Fittings Wrench, 1/2"x 9/16"
 Stck.  
A-320 Fittings Wrench, 3/8" x 7/16"
 Stck.  
6810 Rheodyne Wrench, 1/4" x 5/16"
 Stck.  

LITETOUCH® FITTINGS For Coned Ports !! Prevent twisting of Polymer Tubing / High Pressure with Fingertight Convience / For 1/32",!/16" and 1/8" OD Tubing !!
The LiteTouch Fittings System from Upchurch Scientific® grips tubing at two compression points (see diagram), holding to high pressures with Fingertight convenience. It also prevents polymer tubing from twisting, a potential problem when using standard Fingertight fittings. LiteTouch Fittings are available for use with 1/32", 1/16" and 1/8" OD tubing sizes, and for 10-32 and 1/4-28 coned ports.
For those space-limited applications where nut heads interfere with each other, try our FIushNutTM Fittings (Note: FlushNut Fittings require a tightening tool). To avoid collapsing the ID of your tubing, Upchurch Scientific recommends the LiteTouch system be used on hard tubing only, such as stainless steel, PEEK polymer or titanium. We do not recommend the LiteTouch Ferrule System for repeated use in plastic ports.

REMOVAL TOOL
The LiteTouch (above) and Super Flangeless™ Fittings Systems are ideal for connections that need to be broken frequently, because the lock ring holds the ferrule in place on the tubing until intentionally removed. Once swaged onto the tubing, the lock ring and ferrule keep the nuts in place, thus eliminating the need for flanged tubing in tubing assemblies.
Use our LT-300 Removal Tool
to detach LiteTouch and Super Flangeless Ferrules from tubing. Simply slide the appropriate tool blade slot between the lock ring and the ferrule body. The ring will pop off, releasing the ferrule from the tubing.

Artikelnummer Beschreibung Menge  
REMOVAL TOOL
LT-300 Removal Tool for Lite Touch and Super Flangeless Ferrules 1-pk  
LITETOUCH FERRULE SYSTEMS
For 1/32" OD Tubing
LT-132 PEEK Ferrules, Natural, with SST lock rings Stck.  
For 1/16" OD Tubing
LT-100 PEEK Ferrules, Natural, with SST lock rings Stck.  
LT-135 PEEK Ferrules, Black, with SST lock rings Stck.  
For 1/8" OD Tubing
LT-200 PEEK Ferrules, Natural, with SST lock rings Stck.  
LITETOUCH NUTS
For 1/32" and 1/16" OD Tubing
F-354 Stainless Steel FIushNuts, 10-32 Stck.  
LT-110x PEEK Nuts, Natural, 10-32 10-pk  
For 1/8" OD Tubing
C-235 Short Stainless Steel Nuts, 1/4-28 Stck.  
F-264 Stainless Steel FIushNuts, 1/4-28 Stck.  
LT-210 PEEK Nuts, Natural, 1/4-28 Stck.  
LT-215 Short PEEK Nuts, Natural, 1/4-28 Stck.  


FLUSHNUT™ FITTINGS For Coned and Flat-Bottom Ports -Tightens Flush with the Top of theReceiving part /Several Ferrule Options  
Upchurch Scientific® FlushNut Fittings are designed for those tightspace applications where nut heads often interfere with each other. When coupled with an appropriate ferrule and tightened into a receiving port, the FlushNut's slotted head seats at or near flush with the top of the port. This feature allows FlushNut Fittings to reside in closer proximity than any
other option on the market.
FlushNut Fittings are available for use with a number of ferrule systems and for use with 1/32", 1/16" and 1/8" OD tubing. Pressure ratings for these products range from 700-9,000 psi (48-620 bar), determined by the tubing and ferrule system selected. All FlushNut Fittings are manufactured from 316 stainless steel.

FLUSHNUT FERRULE OPTIONS
Artkelnummer Threads/ Port For Tubing OD Ferrule Options  
F-350 10-32 C 1/16" SeaITighf" F-192  
F-354 10-32 C 1/32" LiteTouch` LT-132  
  10-32 C 1/16" LiteTouch LT-100  
  10-32 C 1/16" LIteTouch SealTight LT-135  
F-364 1/4-28 C 1/8" LiteTouch LT-200  
  1/4-28 FB 1/8" Super Flangeless" P-350, P-35Q
P-359, P-360 		 
  1/4-28 FB 1.8/2.0mm Super Flangeless P-355  
F-356 1/4-28 FB 1/32" Super Flangeless P-248  
  1/4-28 FB 1/16" Super Flangeless P-250, P-259, P-260  
F-358 1/4-28 FB 1/16" Flangeless P-200, P-200N,
P-200R, P-22 1, P-240 		 
F-368 1/4-28 FB 1/8" Flangeless P-300, P-300N, P-340  
  1/4-28 FB 1.8/2.0mm Flangeless P-342  
  1/4-28 FB 3.0mm Flangeless P-343  
P-321 (PEEK) 1/4-28 FB N/A   ferrule required  

FLANGLESS SEALTIGHT FITTINGS For Flat-Bottom Ports -Hold up to 5,000 psi in 1/4-28 Flat-Bottom Ports / All Polymer Construction  
The Upchurch Scientific Flangeless SealTight Fittings system has redefined the pressure range of applications for traditional 1/4-28 flat-bottom ports. Our innovative F-290 Ferrule incorporates the dual compression mechanism of the F-192 coned SealTight Ferrule in a design that allows its use in a flat-bottom port. With this ferrule and a Flangeless SealTight nut, it is now possible to hold pressures up to 5,000 psi (345 bar) with all-polymer components in flat-bottom ports !
All Flangeless SeaITight nuts require the PEEK F-290 Flangeless SeaITight Ferrule. This fittings system, for use with 1/16" OD tubing only, is particularly well suited for applications where metal is undesirable, such as those involving NMR or microwaves.

FLANGLESS SEALTIGHT FITTING FOR 1/16" OD TUBING
Artikelnummer Beschreibung Menge  
Ferrule
F-290 Flangeless SeaITight Ferrules, Black PEEK Stck.  
Nuts
F-292 Stnd. Length Nuts, Stnd. Head, Blue Delrin, 1/4-28 Stck.  
F-294 Stnd. Length Nuts, Stnd. Head, Black PEEK, 1/4-28 Stck.  
F-298 Short Nuts, Stnd. Head, Black PEEK, 1/4-28 Stck.  
FLUSHNUT WRENCHES
F-345 Wrench for 10-32 threaded FIushNut Fittings Stck.  
F-346 Wrench for 1/4-28 threaded FIushNut Fittings Stck.  

SUPER FLANGELESSTM FITTINGS
INTRODUCTION For Flat_Bottom Ports -Designed to Hold to Higher Pressures than Standard Flangeless Fittings /Eliminates Loosening of Nuts Caused by Tubing Twist
nähere Angaben
  FLANGELESS NUT EXTENDER TOOLS
Use the P-298, P-299 or P-399 Extender Tool to tighten any standard,
short or extra long style nut
in hard-to-reach places. For our Headless nuts, try the P-297 Tool. These tools can tighten any Upchurch Scientific knurl-headed male nut (except F-287, F-288 and winged nuts). They can also be used with many of the low pressure nuts - The F-346 Tool tightens FIushNutTM Fittings.

SUPER FLANGELESS FITTINGS For 1/16" OD Tubing (10-32 Flat-Bottom Ports)
Several PEEK™ nut styles are available to connect 1/16" OD tubing into 10-32 flat-bottom ports. Use these fittings with rigid and semi-rigid tubing, such as PEEK, stainless steel and Teflon®. Connect capillary tubing using our NanoTight™ FEP Tubing Sleeves .
´

SUPER FLANGELESS FITTINGS FOR 1/16" OD TUBING
Artikelnummer Beschreibung Menge  
Ferrules
M-650x PEEK Ferrules, Natural with SST lock rings, 10-32 FB 10-pk  
Nuts
M-652 PEEK Short Hex Head Nuts, Green, 10-32 FB Stck.  
M-653 PEEK Headless Short Nuts, Green, 10-32 FB Stck.  
M-654 PEEK Long Knurl/Hex Fat Head Nuts, Green, 10-32 FB Stck.  
M-655 PEEK Long Hex Head Nuts, Green, 10-32 FB Stck.  
FLANGLESLESS NUT EXTENDER TOOLS
F-346 FlushNut Tool for 1/4-28 Nuts Stck.  
P-297 For Headless Style Nuts, aluminum Stck.  
P-298 For Standard Head Nuts, Delrin® Stck.  
P-299 For Standard Head Nuts, aluminum Stck.  
P-399 For Standard Head Nuts, Short, aluminum Stck.  

SUPER FLANGELESSTM FITTINGS (CONT.) For 1/32" and 1/16" OD Tubing (1/4-28, M6 Flat-Bottom Ports)
Several nut styles are available to connect 1/32" and 1/16" OD tubing into 1/4-28 and M6 flat-bottom ports, including our unique F-356 FIushNut™, a fitting designed to seat at or near flush with the top of a port when tightened.
The ferrules are made of Tefzel® or PEEK™ polymer, and the lock rings are made of passivated 316 stainless steel (except the P-260 lock ring, which is PEEK). Any nut can be used with any ferrule on this table, except as noted in footnote 3. Connect capillary tubing into 1/4-28 and M6 flat-bottom ports using these ferrules and NanoTight Tubing Sleeves.

SUPER FLANGELESS FERRULE PRESSURE RATINGS
Artikelnummer Beschreibung bar  
For 1/16" OD Tubing, 10-32 Ports
M-650 Ferrule (using the M-654 PEEK Nut) Fused Silica Tubing (With F-242 NanoTight Sleeve)   TefIon® FEP TubingPEEK TubingStainless Steel Tubing 750 psi (52 bar) 1,700 psi (121 bar) 3,750 psi (259 bar) 3,750 psi (259 bar)  
For 1/32" OD Tubing, 1/4-28 and M6 Ports
P-248-Ferrule (using the P-287 PPS Nut) PEEK Tubing (.008" ID) 2,500 psi (172 bar)  
For 1/16" OD Tubing, 1/4-28 and M6 FB Ports
P-250 Ferrule (using the P-252 Delrin® Nut) ETFE Tubing PEEK Tubing Stainless Steel Tubing 2,400 psi (165 bar) 5,000 psi (345 bar) 7,000 psi (483 bar)  
P-259 Ferrule (using the P-255 PEEK Nut) Teflon FEP Tubing PEEK Tubing Stainless Steel tubing 2,500 psi (172 bar) 2,400 psi (165 bar) 2,000 psi (138 bar)  
P-260 Ferrule (using the P-252 Delrin Nut) ETFE Tubing PEEK Tubing Stainless Steel Tubing 2,600 psi (179 bar) 2,800 psi (193 bar) 1,800 psi (124 bar)  
FB = Flat-bottom part. These data were generated under optimal conditions, using water at room temperature. The data
presented refer to the capability of the fittings, not the tubing. Your results may vary, depending
on variables such as: the solvent used; the materials of the tubing, port, nut and ferrule used;
and the temperature at which your analyses are run.

SUPER FLANGELESS FITTINGS FOR 1/32" AND 1/16" OD TUBING
Artikelnummer Beschreibung Menge  
Ferrules
P-248x Tefzel Ferrules, Green, with SST lock rings, for 1/32" OD tubing 10-pk  
P-250x PEEK Ferrules, Natural, with SST lock rings, for 1/16" OD tubing 10-pk  
P-259x ETFE Ferrules, Yellow, with SST lock rings, for 1/16" OD tubing 10-pk  
P-260 PEEK One-Piece Ferrules, Natural, for 1/16" OD tubing Stck.  
Nuts
F-356 Stainless Steel FlushNuts (2), 1/4-28 Stck.  
LT-105 Stainless Steel Short Hex Head Nuts, 1/4-28 Stck.  
LT-115x PEEK Short Nuts, Natural, 1/4-28 10-pk  
P-213 PEEK Short Headless Nut (3), Black, M6    Stck.  
P-217 PPS Nut, Black, M6 Stck.  
P-219 PEEK Short Nut, Black, M6 Stck.  
P-232 PEEK Short Headless Nut (3), Natural 1/4-28 Stck.  
P-246 Teflon PFA Nuts, Natural, 1/4-28    Stck.  
P-251 PEEK Nuts with "wings", Natural, 1/4-28  Stck.  
P-252 Delrin Nuts, Gray, 1/4-28    Stck.  
P-255x PEEK Nuts, Natural, 1/4-28    10-pk  
P-287 PPS Headless Nut (3), Natural,1/4-28    Stck.  
P-289 PPS Headless Nut (3), Black, M6    Stck.  
P-420 PEEK Female Nut, Natural, 1/4-28    Stck.  
1 Some of the nuts on this page are available in additional colors. Please contact us for more information. 2 A tightening met is required for this fitting. 3 Use only the P-259 Ferrule with the 1/16" Super Flangeless Headless Nuts, SST = Stainless Steel

SUPER FLANGELESS™ FITTINGS (CONT.) For 1/8" and 1.8/2.0mm OD Tubing (1/4-28, M6 Flat-Bottom Ports)
These fittings offer all of the benefits of Super Flangeless Fittings  for 1/8" and 1.8/2.Omm OD tubing. Use any of the ferrules with any 1/4-28 nuts on this table, except as noted in footnote 3. Use the P-352 Ferrule with any M6 threaded nut on this table to connect 1/8" OD tubing into M6 ports.
The ferrules are made of PEEK™, Tefzel® or Kel-F® polymer, and the lock rings are made of passivated 316 stainless steel (except the P-360 lock ring, which is PEEK).

PRESSURE RATINGS FOR SUPER FLANGELE55 FERRULE
Artikelnummer Beschreibung bar
For 1/8" OD Tubing, 1/4-28 and M6 FB Ports
P-350 and P-352 Ferrules
(using the LT-210 PEEK Nut)		 PEEK Tubing (.062" ID) PEEK Tubing (.080" ID) Stainless Steel Tubing 4,100 psi (283 bar) 2,900 psi (200 bar) 5,800 psi (400 bar)
P-359 Ferrule
(using the LT-21 0 PEEK Nut)		 Teflon® FEP Tubing (.062" ID) ETFE Tubing (.062" ID) PEEK Tubing (.080" ID) 1,200 psi (83 bar) 1,800 psi (124 bar) 1,000 psi (69 bar)
P-360 Ferrule
(using the LT-21 0 PEEK Nut)		 Teflon FEP Tubing (.062" ID) ETFE Tubing (.062" ID) PEEK Tubing (.080" ID) 1,400 psi (97 bar) 2,700 psi (186 bar) 700 psi (48 bar)
For 1.8/2.Omm OD Tubing, 1/4-28 and M6 FB Ports
P-355 Ferrule
(using the P-377 PPS Nut)
 Teflon FEp Tubing (2.0mm OD x 1.0mm ID) ETFE Tubing (1.8mm OD x 0.20" ID) PEEK Tubing (1.8mm OD x .020" ID) 1,000 psi (69 bar) 1,250 psi 86 bar) 1,500 psi (103 bar)
These data were generated under optimal conditions, using water at room temperature. The data presented refer to the capability of the tittings, not the tubing. Your results may vary, depending on variables such as, the solvent used the materials of the tubing, port, nut and ferrule used, and the temperature at which your analyses are run.

SUPER FLANGELESS FITTINGS FOR 1/8" AND 1.8/2.OMM 00 TUBING (1)
Artikelnummer Beschreibung Menge  
Ferrules
P-350x PEEK Ferrules, Natural, with SST lock rings, for 1/8" OD tubing 10-pk  
P-352 PEEK Ferrules, Black, with SST lock rings, for 1/8" OD tubing Stck.  
P-359x ETFE Ferrules, Yellow, with SST lock rings, for 1/8" OD tubing 10-pk  
P-360x PEEK One-Piece Ferrules, Natural, for 1/8" OD tubing 10-pk  
P-355 Kel-F Ferrules, Green, with SST lock ring, for 1.8/20mm OD tubing Stck.  
Nuts
C-235 Stainless Steel Short Hex Head Nuts, 1/4-28 Stck.  
F-156 PEEK Female Nut, Black, 1/4-28 Stck.  
F-364 Stainless Steel FlushNuts® (2)1/4-28 Stck.  
LT-210 PEEK Nuts, Natural, 1/4-28 Stck.  
LT-215 PEEK Short Nuts, Natural, 1/4-28 Stck.  
P-317 PPS Nut, Black, M6 Stck.  
P-319 PEEK Short Nut, Black, M6 Stck.  
P-331 PEEK Nut, Natural, 1/4-28 Stck.  
P-332 Delrin® Nuts, Black, 1/4-28 Stck.  
P-336 PEEK Short Headless Nut(3) Natural, 1/4-28 Stck.  
P-337 PEEK Short Headless Nuts(4), Black, M6 Stck.  
P-387 PPS Headless Nut(3), Natural, 1/4-28 Stck.  
P-400 Teflon PFA Nuts, Natural, 1/4-28 Stck.  
(1) Some of the nuts on this table are available in additional colors. Please contact us for more information. (2) Requires the use of F-346 Fluse/Nut Fool.
(3) Use only P-359 Ferrules with these 1/8" Super Flangeless Headless Nuts,
(4) Use only P-352 Ferrules with M6 Super Flangeless Headless Nuts Requires the use of P-297 Headless
Nut Extender Tool to tighten sufficiently              SST = Stainless Steel

PEEKTM ZDV UNIONS
Upchurch Scientific® PEEK ZDV Unions come complete with two F-300 Fingertight Fittings for 1/16" OD tubing and are pressure rated to 6,000 psi (414 bar). Upchurch Unions PEEK                       

PEEK TEES & CROSSES
Our PEEK Tees and Crosses include high pressure F-300 PEEK Fingertight Fittings - allowing maximum operating pressures to 3,500 psi (241 bar) when used with 1/16" OD PEEK, titanium or stainless steel tubing. They can also operate in lower pressure applications using other tubing such as Teflon® or Tefzel® (ETFE).

PEEK 7-PORT MANIFOLD
Combine several streams into one or split one fluid stream into several. This PEEK 7-Port Manifold comes complete with F-331 Fingertight Fittings for 1/16" OD tubing with a pressure rating of 6,000 psi (414 bar). Seal unused ports with any of our polymer 10-32 plugs.

Artikelnummer Threads Thru-hole Includes Swept Volumen  
PEEK ZDV UNIONS
P-704 Union 10-32 .020" (.50mm) (2) F-300 .28µL  
P-742 Union 10-32 .010" (.25mm) (2) F-300 .07µL  
P-760 Union 10-32 .050" (1.25mm) (2) F-300 1.2µL  
PEEK TEES AND CROSSES
P-727 Tee 10-32 .020" (.50mm) (3) F-300 .57µL  
P-728 Tee 10-32 .050" (1.25mm) (3) F-300 3.0µL  
P-729 Cross 10-32 .020" (.50mm) (4) F-300 .72µL  
P-730 Cross 10-32 .050" (1.25mm) (4) F-300 3.5µL  
PEEK MANIFOLD
P-170 7-Port 10-32 .020" (.50mm) (7) F-331 2.2µL  

STAINLESS STEEL ZDV UNIONS

These high pressure, zero-dead-volume (ZDV) unions, manufactured by Upchurch ScientificTM, are designed as direct replacements for specific manufacturers parts. Each union is precision machined from 316 stainless steel, carefully passivated, then thoroughly rinsed. Each comes complete with stainless steel nuts and ferrules, and is rated to 10,000 psi (690 bar) when wrench tightened. Please Note: Use our P-554 Gauge Plug to assist in creating a true ZDV connection with the U-438 Union.

STAINLESS STEEL TEES & CROSSES
These 316 stainless steel products come complete with 10-32 fittings for use with 1/16" OD tubing and are rated to 10,000 psi (690 bar). They are also compatible with Parker and Valco male fittings.

Artikelnummer Threads Thru-hole Includes Swept Volumne  
STANDARD STAINLESS STEEL ZDV UNIONS
U-402 10-32 .020" (.50mm) (2) U-400 /U-401 .13µL  
U-435 10-32 .010" (.25mm) (2) U-400 /U-401 .02µL  
U-437 10-32 .050" (1.25mm) 2) U-400 /U-401 .48µL  
U-438 10-32 .067" (1.70mm) 2) U-400 /U-401 Near 0µL  
1593 1/4-28 for use with 1/8" OD Tubing .050" (1.25mm (2) C-235 /C-236 1.48µL  
SSI COMPATIBLE ZDV UNION
U-352 1/4-28 .020" (.50mm) (2) U-350 /U-351 .18µL  
VICI (VALCO) COMPATIBLE ZDV UNION
U-322 10-32 .020" (.50mm) (2) U-320 /U-321 1.5µL  
WATERS COMPATIBLE ZDV UNION
U-421 10-32 .020" (.50mm) (2) U-410 /U-401 .10µL  
STAINLESS STEEL TEES AND CROSSES
U-428 Tee .020" (.50mm) (3) U-400 /U-401 .57µL  
U-429 Tee .040" (1.00mm) (3) U-400 /U-401 2.1µL  
U-430 Cross .020" (.50mm) (4) U-400 /U-401 .72µL  
U-431 Cross .040" (1.00mm) (4) U-400 /U-401 2.5µL  

STATIC MIXING TEES - PEEK™ Body with Two-Piece Fingertight Fittings / Low Swept Volume Mixing Tee PRESSURE GAUGE TEE
-Complete with Stainless Steel Fittings
Upchurch Scientific® Static Mixing Tees are ideal for microbore or analytical gradient HPLC. They have a low swept volume of 2.2µL (includes frit volume) and are designed for flow rates of 0.5 to 3 mL/min and a maximum pressure of 6,000 psi (414 bar). The back pressure caused by the tee is typically only 10 to 20 psi (.7 to 1.4 bar) at these flow rates. The thru-holes are .020" and the center port features a 10 µm UHMWPE or stainless steel frit that aids mixing.
     Many HPLC systems have pumps that provide a digital readout of the inline system pressure. However a number of systems do not, creating the need for a gauge along your 1/16" OD tubing pathway to monitor pressure. The Upchurch Scientific U-433 Pressure Gauge Tee is the solution. This Tee comes complete with 10-32 coned stainless steel fittings for 1/16" OD tubing and has an internal port suitable to connect to 1/4" pipe threads (NPT), standard to most gauges. Please Note: a pressure gauge is not included with this Tee, however they are available from a number of laboratory supply companies.
!! Before installing your gauge into this Tee, simply wrap Teflon' tape around the male threads of your pressure gauge four times. This will ensure a leakfree seal, even at standard HPLC operating pressures !!

FITTINGS KITS
-For HPLC and FIA Systems The Upchurch Scientific 1400 Series Kits contain fittings for typical systems. Besides nuts and ferrules, most kits also include tubing, unions and other
parts - all at a substantial savings over individually priced components. The HPLC Starter Kit includes 5-feet of 1/16" OD x.010" ID PEEK tubing,
a tubing cutter and an F-120FUNPACK. Our Super Kit contains a wider selection of fittings and tubing, as well as filters, guard columns and
a polymer tubing cutter. 		Upchurch Fitting Kit

Artikelnummer Includes  
PRESSURE GAUGE TEE
U-433 Pressure Gauge Tee (2) U-400 /U-401  
STATIC MIXING TEE
U-466 Static Mixing Tee, 10µm UHMWPE Frit (3) F-300  
U-466S Static Mixing Tee, 10µm Stainless Steel Frit (3) F-300  
FITTING KITS
1435 Super Kit -----------  
1458 FIA Fittings Kit -----------  
2100 HPLC Starter Kit -----------  
1457 PEEK™ Fittings Kit -----------