Multipositionsventile von VICI Valco
Einführung und Beschreibungen
|
Valco
Multiposition Valves
Instead of the back and forth
switching of two position valves, multiposition valves step
incrementally through continuous revolutions (bi-directionally with the
microelectric actuator). While we can supply older models, all the
valves in this catalog have a preload assembly. This design allows the
rotor to be inspected or replaced without taking the valve off the
actuator, and valves ordered with a microelectric actuator are
permanently aligned. |
Flowpath Configurations
SD (dead-ended)
valves select one of 4 to 16 dead-ended streams, directing it through the valve
outlet to a sample valve, pressure sensor, detector, column, etc. Thesame
configuration can also direct one stream to a number of outlets for fraction
collection.
SC (common outlet)
valves are similarto SDs, exceptthat instead of being dead-ended the
non-selected streams flow to a common outlet.
SF (flow-through)
valves are similar to SDs and SCs, selecting a stream and sending it to the
outlet. However, SFs allow the non-selected streams to flow through individual
outlets instead of a common outlet.
ST (trapping)
valves are used for multi-column, multi-sample, or multitrap operations.
STF
(trapping/flow-through) valves are similar to
STs,with the single difference that the non-selected streams are returned to t
heir own vents or sources rather that being dead-ended or trapped as they are in
the standard ST configuration.
PORT
DIAMETERS
LOW PRESSURE (MW) |
PORT
DIAMETERSHIGH PRESSURE (UW) |
Fitting size |
No. of
Positions |
Standard
port diameter |
Fitting size |
No. of
Positions |
Standard
port diameter |
SD |
SD |
1/16" |
4 - 16 |
0,75 mm (
0,030" ) |
1/16" |
4 - 12 |
0,40 mm (
0,16" ) |
1/8" |
4 - 16 |
1,0 mm (
0,040" ) |
1/8" |
4, 6, 8 |
0,75 mm (
0,030" ) |
1/4" |
4 - 10 |
4,0 mm (
0,156" ) |
ST |
SC |
1/16" |
4, 6 |
0,40 mm (
0,16" ) |
1/16" |
4 - 16 |
1,0 mm (
0,040" ) |
|
|
|
1/8" |
4 - 16 |
1,0 mm (
0,040" ) |
|
|
|
1/4" |
4 - 8 |
4,0 mm (
0,156" ) |
|
|
|
SF |
|
|
|
1/16" |
4 - 16 |
1,0 mm (
0,040" ) |
|
|
|
1/8" |
4 - 16 |
1,0 mm (
0,040" ) |
|
|
|
1/4" |
4 - 8 |
4,0 mm (
0,156" ) |
|
|
|
ST |
|
|
|
1/16" |
4 - 16 |
0,75 mm (
0,030" ) |
|
|
|
1/8" |
4 - 16 |
1,0 mm (
0,040" ) |
|
|
|
STF |
|
|
|
1/16" |
4 - 16 |
0,75 mm (
0,030" ) |
|
|
|
1/8" |
4 - 16 |
1,0 mm (
0,040" ) |
|
|
|
Spezifikationen
Low Pressure Multiposition
Valves
Valco MW Type low pressure valves are available with 1/16",1 /8" or
1/4" fittings. (Refer to the chart opposite for port diameters.) The
1/16" and 1/8" valves can be ordered with 4, 6, 8, 10, 12, or 16
positions, in any of the five flowpath configurations. Valves with 1/4"
fittings are available in SD, SC, and SF flowpaths: SDs have 4, 6, 8, or 10
positions; SCs and SFs have 4, 6, or 8.
Although not shown in this catalog, MW valves are also available in a higher
temperature version. While actual specifications vary with the configuration,
typical specifications are 200 psi and 330°C. Consult ourtechnical staff for
more information.
VALCO
MULTIPOSITION VALVES - LOW PRESSURE (MW) |
Fittings size |
Number
of
positions |
Standard rotor
material |
Max pressure |
Max temp. |
Max pressure |
Max temp. |
Max pressure |
Max temp. |
|
|
|
SD
Dead-end flowpath |
SC
Common outlet flowpath |
Note:
All low pressure 1/16" and 1/8" valves are also available in
versions up to 330°C. |
1/16" |
4 - 16 |
Valcon E |
400 psi gas |
200°C |
200 psi gas |
200°C |
1/8" |
4 - 8 |
Valcon E |
400 psi gas |
200°C |
200 psi gas |
200°C |
|
10
- 16 |
Valcon E |
200 psi gas |
200°C |
200 psi gas |
200°C |
1/4" |
4 - 8 |
Valcon E2 |
100 psi gas |
75°C |
100 psi gas |
75°C |
|
|
|
SF
Flow-through flowpath |
ST
Trapping flowpath |
STF
Trapping/Flow-through flowpath |
1/16" |
4 - 16 |
Valcon E |
200 psi gas |
200°C |
200 psi gas |
200°C |
200 psi gas |
200°C |
1/8" |
4 - 16 |
Valcon E |
200 psi gas |
200°C |
200 psi gas |
200°C |
200 psi gas |
200°C |
1/4" |
4 - 8 |
Valcon E2 |
100 psi gas |
75°C |
|
|
|
|
High Pressure Multiposition
Valves
Valco UW Type high
pressure valves are available in SD and ST flowpaths. SD valves with 1/16"
fittings are available in 4, 6, 8, 10 or 12 positions, while 1/8" valves
can be ordered with 4, 6, 8 or 10 positions. ST flowpath UW valves have
1/16" fittings, with either 4 or 6 positions. ( Refer to the chart opposite
for port diameters.)
VALCO
MULTIPOSITION VALVES - HIGH PRESSURE (UW) |
Fittings
size |
Number
of
positions |
Standard rotor
material |
Max pressure |
Max temp. |
Max pressure |
Max temp. |
|
|
|
SD
Dead-end flowpath |
ST
Trapping flowpath |
1/16" |
4 - 12 |
Valcon E |
5000 psi liq |
75°C |
5000 psi liq |
75°C |
1/8" |
4 - 8 |
Valcon E |
5000 psi liq |
75°C |
|
|
Hier geht es zu (bitte
anklicken)